Direct ink writing of cellulose-plasticized aqueous ceramic slurry for YAG transparent ceramics
نویسندگان
چکیده
Aqueous transparent ceramic YAG slurry with high solids loading up to 52 vol.% is proposed in this work for 3D direct ink writing. Celluloses are readily adjusted the design enhance plasticity, through which both printability of slurries and optical quality ceramics considerably improved. We demonstrate that in-line transmittance at 1064 nm a 1.2-mm-thick can approach about 81.0%. This research provides facile printing routine manufacturing from water-based slurry.Graphical abstract
منابع مشابه
Direct Ink Writing of Three-Dimensional Ceramic Structures
The ability to pattern ceramic materials in three dimensions (3D) is critical for structural, functional, and biomedical applications. One facile approach is direct ink writing (DIW), in which 3D structures are built layer-by-layer through the deposition of colloidalor polymer-based inks. This approach allows one to design and rapidly fabricate ceramic materials in complex 3D shapes without the...
متن کاملDirect Ink Writing of Three-Dimensional (K, Na)NbO3-Based Piezoelectric Ceramics
A kind of piezoelectric ink was prepared with Li, Ta, Sb co-doped (K, Na)NbO₃ (KNN) powders. Piezoelectric scaffolds with diameters at micrometer scale were constructed from this ink by using direct ink writing method. According to the micro-morphology and density test, the samples sintered at 1100 °C for 2 h have formed ceramics completely with a high relative density of 98%. X-ray diffraction...
متن کاملDirect Ink Writing of 3D Functional Materials
New methods for materials fabrication at the microand nanoscale will drive scientific and technological advances in areas of materials science, chemistry, physics, and biology. The broad diversity of potentially relevant materials, length scales, and architectures underscores the need for flexible patterning approaches. One important example is the fabrication of 3D periodic structures comprise...
متن کاملCeramic planar waveguide laser of non-aqueous tape casting fabricated YAG/Yb:YAG/YAG
Ceramic YAG/Yb:YAG/YAG planar waveguide lasers were realized on continuous-wave and mode-locked operations. The straight waveguide, fabricated by non-aqueous tape casting and solid state reactive sintering, enabled highly efficient diode-pumped waveguide continuous-wave laser with the slope efficiency of 66% and average output power of more than 3 W. The influence of the waveguide structure on ...
متن کاملHigh-Operating-Temperature Direct Ink Writing of Mesoscale Eutectic Architectures.
High-operating-temperature direct ink writing (HOT-DIW) of mesoscale architectures that are composed of eutectic silver chloride-potassium chloride. The molten ink undergoes directional solidification upon printing on a cold substrate. The lamellar spacing of the printed features can be varied between approximately 100 nm and 2 µm, enabling the manipulation of light in the visible and infrared ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MRS Communications
سال: 2022
ISSN: ['2159-6867', '2159-6859']
DOI: https://doi.org/10.1557/s43579-022-00163-y