Direct current high-pressure glow discharges
نویسندگان
چکیده
منابع مشابه
Large effects of small pressure changes in the kinetics of low pressure glow discharges
The effect of comparatively small pressure changes on the composition of low pressure hollow cathode DC discharges is investigated with a combination of experimental diagnostic techniques and simple models of the plasma kinetics. The plasma precursors considered are H2, Ar/H2 mixtures, and air. In all cases, sudden characteristic composition changes are observed in the pressure interval between...
متن کاملModeling nonthermal plasmas generated in glow discharges*
Over the past decade, tremendous progress has been made in the modeling of nonthermal plasmas, and models have now reached the point that they are being used to help guide the experimental optimization of plasma based devices. In this communication we provide an overview of models used to describe nonthermal plasma generated in glow discharges. We show results from two applications, plasma disp...
متن کاملDust acoustic waves in a direct current glow discharge
An experimental investigation of dust acoustic ~DA! waves in a dc glow discharge plasma is described. The glow discharge is formed between a 3 cm anode disk and the grounded walls of a 60 cm diameter vacuum chamber which is filled with nitrogen gas at a pressure of about 100 mTorr. Dust located on a tray in the chamber is attracted into the plasma where it is trapped electrostatically. The dust...
متن کاملPulsed RF discharges, glow and filamentary mode at atmospheric pressure in argon
The properties of a pulsed radio frequency capacitive discharge are investigated at atmospheric pressure in argon. The discharge can operate in two different modes: a homogeneous glow discharge or turn into filaments. By pulsing the 13.56 MHz generator both the filamentary and the glow modes can be selected depending on the pulse width and period. For a 5μs pulse width (∼70 RF cycles in the pul...
متن کاملIntroduction to Low Pressure Glow Discharges for Semiconductor Manufacturing with special Emphasis on Plasma Etching
Plasma processing is one of the key technologies in the fabrication of modern silicon devices. It is applied to approximately one third of the several hundred fabrication steps. Plasma etching enables together with advanced lithography the high volume production of submicron structures. The significant difference to the formerly used wet etching in liquid chemicals is its ability to keep the ma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Physics
سال: 1999
ISSN: 0021-8979,1089-7550
DOI: 10.1063/1.369505