Direct Charge Control Method for Inverters in Discontinuous Conduction Mode
نویسندگان
چکیده
The discontinuous conduction mode (DCM) of the inductor current is an effective way to achieve high efficiency and power density inverters because it has advantages zero-current switching small inductance filter inductor. Although DCM can operate at a fixed frequency, there been no linear model for realizing high-performance digital control. This paper provides solution this problem. Firstly, first-order charge quantity (CQM) inverter with frequency established, which uses quantities output by bridge as control variable. Secondly, direct (DCC) method proposed, design process significantly simplified. Finally, performance proposed verified experiments using 1 kW prototype, high-quality voltage waveform peak above 98% was achieved. outperforms existing works CQM that realizes simplifies controller.
منابع مشابه
Sliding-Mode Control of the DC-DC Ćuk Converter in Discontinuous Conduction Mode
In this paper, a novel approach for two-loop control of the DC-DC Ćuk converter in discontinuousconduction mode is presented using a sliding mode controller. The proposed controller can regulatethe output of the converter in a wide range of input voltage and load resistance. Controllerparameters are selected using PSO algorithms. In order to verify the accuracy and efficiency of thedeveloped sl...
متن کاملVoltage Regulation of DC-DC Series Resonant Converter Operating in Discontinuous Conduction Mode: The Hybrid Control Approach
Dynamic modeling and control of dc-dc series resonant converter (SRC) especially when operating in discontinuous conduction mode (DCM) is still a challenge in power electronics. Due to semiconductors switching, SRC is naturally represented as a switched linear system, a class of hybrid systems. Nevertheless, the hybrid nature of the SRC is commonly neglected and it is modeled as a purely contin...
متن کاملControlling Common-Mode Voltages in Multilevel Inverters
This paper proposes a novel method based on pulse width modulation techniques toreduce and control the common-mode voltage in three-phase multilevel inverters. Besides controllingthe common-mode voltage, this method is capable of controlling capacitors voltages and load currentswith low switching losses and harmonic contents. In fact, due to the existence of different pulsepatterns and the poss...
متن کاملModelling the PWM SEPIC Converter in Discontinuous Conduction Mode
A full-order dynamic model of the pulse-width modulation (PWM) DC-to-DC SEPIC converter in discontinuous conduction mode (DCM) is presented in this paper. The derivation procedure is based on the smallsignal PWM switch model in DCM used in conjunction with a PWM derived SEPIC topology. The small-signal characteristics of the PWM SEPIC converter in DCM obtained in a similar way as the small-sign...
متن کاملPredictive Direct Flux Control—A New Control Method of Voltage Source Inverters in Distributed Generation Applications
Abstract: Voltage source inverters (VSIs) have been widely utilized in electric drives and distributed generations (DGs), where electromagnetic torque, currents and voltages are usually the control objectives. The inverter flux, defined as the integral of the inverter voltage, however, is seldom studied. Although a conventional flux control approach has been developed, it presents major drawbac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2022
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en15186608