Direct-bonded GaAs∕InGaAs tandem solar cell
نویسندگان
چکیده
منابع مشابه
Plasmonic polymer tandem solar cell.
We demonstrated plasmonic effects in an inverted tandem polymer solar cell configuration by blending Au nanoparticles (NPs) into the interconnecting layer (ICL) that connects two subcells. Experimental results showed this plasmonic enhanced ICL improves both the top and bottom subcells' efficiency simultaneously by enhancing optical absorption. The presence of Au NPs did not cause electrical ch...
متن کاملHigh performance polymer tandem solar cell
A power conversion efficiency of 9.02% is obtained for a fully solution-processed polymer tandem solar cell, based on the diketopyrrolopyrrole unit polymer as a low bandgap photoactive material in the rear subcell, in conjunction with a new robust interconnecting layer. This interconnecting layer is optically transparent, electrically conductive, and physically strong, thus, the charges can be ...
متن کاملAnalyses of Interfaces in Wafer-Bonded Tandem Solar Cells by Aberration-Corrected STEM and EELS
High-quality III-V multi junction solar cells on Si can be fabricated by surface-activated wafer bonding at room temperature. In this way the formation of lattice-mismatch induced defects in the active solar cell layers can be reduced or completely avoided. In this approach, a 10 μm thin GaInP/GaAs dual junction solar cell is grown lattice-matched on GaAs and transferred to Si by direct wafer b...
متن کاملDye-sensitized CuAlO2 photocathodes for tandem solar cell applications
Dye-sensitized solar cells (DSCs) using the p-type semiconductor CuAlO2, in conjunction with a highly effective hole injecting dye and an iodide-triiodide-based electrolyte have been produced, demonstrating photocathodic behavior. An improved open-circuit voltage (VOC) of 333 mV was observed, compared to analogous devices using NiO, which can be explained by the CuAlO2 valence-band energy, whic...
متن کاملA polymer tandem solar cell with 10.6% power conversion efficiency
An effective way to improve polymer solar cell efficiency is to use a tandem structure, as a broader part of the spectrum of solar radiation is used and the thermalization loss of photon energy is minimized. In the past, the lack of high-performance low-bandgap polymers was the major limiting factor for achieving high-performance tandem solar cell. Here we report the development of a high-perfo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2006
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.2347280