Dimensional processing of composite materials by picosecond pulsed ytterbium fiber laser
نویسندگان
چکیده
منابع مشابه
Heat accumulation during pulsed laser materials processing.
Laser materials processing with ultra-short pulses allows very precise and high quality results with a minimum extent of the thermally affected zone. However, with increasing average laser power and repetition rates the so-called heat accumulation effect becomes a considerable issue. The following discussion presents a comprehensive analytical treatment of multi-pulse processing and reveals the...
متن کاملPicosecond to femtosecond pulses from high power self mode-locked ytterbium rod-type fiber laser.
We have designed an ytterbium rod-type fiber laser oscillator with tunable pulse duration. This system that delivers more than 10 W of average power is self mode-locked. It yields femtosecond to picosecond laser pulses at a repetition rate of 74 MHz. The pulse duration is adjusted by changing the spectral width of a band pass filter that is inserted in the laser cavity. Using volume Bragg grati...
متن کاملEfficient, high-power, ytterbium-fiber-laser-pumped picosecond optical parametric oscillator.
We report a high-power picosecond optical parametric oscillator (OPO) synchronously pumped by a Yb fiber laser at 1.064 μm, providing 11.7 W of total average power in the near to mid-IR at 73% extraction efficiency. The OPO, based on a 50 mm MgO:PPLN crystal, is pumped by 20.8 ps pulses at 81.1 MHz and can simultaneously deliver 7.1 W of signal at 1.56 μm and 4.6 W of idler at 3.33 μm for 16 W ...
متن کاملUltrashort pulsed fiber laser welding and sealing of transparent materials.
In this paper, methods of welding and sealing optically transparent materials using an ultrashort pulsed (USP) fiber laser are demonstrated which overcome the limit of small area welding of optical materials. First, the interaction of USP fiber laser radiation inside glass was studied and single line welding results with different laser parameters were investigated. Then multiline scanning was ...
متن کاملYtterbium-Phosphate Glass for Microstructured Fiber Laser
In the paper, we report on the development of a synthesis and melting method of phosphate glasses designed for active microstructured fiber manufacturing. Non-doped glass synthesized in a P₂O₅-Al₂O₃-BaO-ZnO-MgO-Na₂O oxide system served as the matrix material; meanwhile, the glass was doped with 6 mol% (18 wt%) of Yb₂O₃, as fiber core. The glasses were well-fitted in relation to optical (refract...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2017
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/941/1/012039