منابع مشابه
Machinability of glass fiber reinforced plastic (GFRP) composite materials
This paper deals with the study of machinability of GFRP composite tubes of different fiber orientation angle vary from 30 to 90. Machining studies were carried out on an all geared lathe using three different cutting tools: namely Carbide (K-20), Cubic Boron Nitride (CBN) and Poly-Crystalline Diamond (PCD). Experiments were conducted based on the established Taguchi’s Design of Experiments (DO...
متن کاملMoisture Diffusion Properties of Fabric Composite (Glass Fiber/Epoxy Resin)
In this study, the effect of hygrothermal conditioning on the moisture diffusion properties of the fabric composite (glass fiber/epoxy resin) was investigated. The water uptake of the specimens conditioned in humid environment at different relative humidities (0, 60 and 96 % r.h) at constant temperature (60°C) was evaluated by weight gain measurements. The moisture diffusion properties of the f...
متن کامل3–Dimensional Fabric Reconstruction from 2–Dimensional Orientation Images
3–dimensional (3d) automatic crystal orientation mapping (ACOM) allows to sample parallel 2d section raster images which represent the orientation of crystal grains. The fabric, i.e. the partition of the specimen into 3d crystal grains, can be approximated given its intersections with parallel planes provided by series of 2–dimensional raster orientation images. A method to model the 3d fabric ...
متن کاملMaPnet: A Three Dimensional Fabric for Reliable Multi-core Processors
Technological trends into the nanometer regime have led to significantly higher failure rates. Consequently, high reliability and fault tolerance are now getting more emphasis. We are attempting to solve these issues of reliability and tolerance on a simple pipeline, generally used in many-core designs and GPUs. StageNet, which is fine-grained reconfigurable pipeline design in a multi-core proc...
متن کاملParameter optimization in milling of glass fiber reinforced plastic (GFRP) using DOE-Taguchi method
INTRODUCTION Optimization of machining parameters is essential for improving expected outcome of any machining operation. CASE DESCRIPTION The aim of this work is to find out optimum values of machining parameters to achieve minimal surface roughness during milling operation of GFRP. DISCUSSION AND EVALUATION In this machining operation speed, depth of cut and feed rate are considered as pa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan)
سال: 1993
ISSN: 0371-0580,1880-1994
DOI: 10.4188/transjtmsj.46.8_p336