Dimensional Change of Raw Coke Powder Compacts at Calcination
نویسندگان
چکیده
منابع مشابه
Surface Treatment of Powder Metallurgical Compacts
Introduction Powder metallurgy (p/M) is a rapidly expanding technology for manufacturing of structural parts. The PA4 process provides economical as well as technical benefits over conventional processing of wrought material. It is possible to fabricate high quality, complex parts to close tolerances without machining. The energy consumption is low and the material utilisation and productivity ...
متن کاملMagnetoresistance of Chromium Dioxide Powder Compacts
Cold-pressed powders of the half-metallic ferromagnet CrO2 are dielectric granular metals. Hysteretic magnetoresistance with maxima at the coercive field arises from interparticle contacts. Dilution with insulating antiferromagnetic Cr2O3 powder reduces the conductivity by 3 orders of magnitude, but enhances the magnetoresistance ratio which reaches 50% at 5K. The negative magnetoresistance is ...
متن کاملSintering and Foaming of Barium Silicate Glass Powder Compacts
The manufacture of sintered glasses and glass-ceramics, glass matrix composites, and glass-bounded ceramics or pastes is often affected by gas bubble formation. Against this background, we studied sintering and foaming of barium silicate glass powders used as SOFC sealants using different powder milling procedures. Sintering was measured by means of heating microscopy backed up by XPD, differen...
متن کاملLubricant Pyrolysis During Sintering of Powder Metallurgy Compacts
The chemistry surrounding the pyrolysis of N,NЈ-ethylenebisstearimide (EBS) compacted with iron powder is described for the first time. Heat treatment is carried out in a 5 vol pct hydrogen atmosphere (balance nitrogen) over the 100 °C to 850 °C range. The exhaust from the furnace is monitored by Fourier transform infrared and dispersive ultraviolet absorption spectroscopy; condensable material...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TANSO
سال: 1985
ISSN: 1884-5495,0371-5345
DOI: 10.7209/tanso.1985.131