Dilatometry of ball milled nickel nano powder during non-isothermal sintering

Combustion and Ball Milled Synthesis of Rare Earth Nano-Sized Ceria Powder

This paper reports a study on nanocrystalline ceria powder prepared by high energy ball-milling and combustion synthesis methods. The combustion synthesis was carried out using ceric ammonium nitrate as oxidizer and citric acid, glycine or citric acid plus glycine as fuel. The minimum crystallite size of ceria powder is obtained by combustion synthesis of ceric ammonium nitrate and citric acid....

Nano Powder Direct Metal Sintering Systems Specification

Microstructural Evolution of Dy2O3-TiO2 Powder Mixtures during Ball Milling and Post-Milled Annealing

The microstructural evolution of Dy₂O₃-TiO₂ powder mixtures during ball milling and post-milled annealing was investigated using XRD, SEM, TEM, and DSC. At high ball-milling rotation speeds, the mixtures were fined, homogenized, nanocrystallized, and later completely amorphized, and the transformation of Dy₂O₃ from the cubic to the monoclinic crystal structure was observed. The amorphous transf...

Magnetic properties of ball-milled SrFe12O19 particles consolidated by Spark-Plasma Sintering

The room-temperature magnetic properties of ball-milled strontium hexaferrite particles consolidated by spark-plasma sintering are strongly influenced by the milling time. Scanning electron microscopy revealed the ball-milled SrFe12O19 particles to have sizes varying over several hundred nanometers. X-Ray powder-diffraction studies performed on the ball-milled particles before sintering clearly...

Investigation on mm-wave sintering of metal powder compacts using in-situ dilatometry and electrical resistivity measurements

Sintering of metal powders is a well-established industrial process for specific applications, which allow a cheap series production of metal parts even with complex shape. The residual porosity, always present in sintered power compacts, limits their mechanical strength. On the other hand, for several products such porosity is needed. Products of that kind are for example: metal filters showin...