Digital control by computed torque method.
نویسندگان
چکیده
منابع مشابه
Stabilization and Walking Control for a Simple Passive Walker Using Computed Torque Method (RESEARCH NOTE)
Abstract The simple passive dynamic walker can walk down a shallow downhill slope with no external control or energy input. Nevertheless, the period-one gait stability is only possible over a very narrow range of slopes. Since the passive gaits are extremely sensitive to slope angles, it is important to use a control strategy in order to achieve a wide range of stable walking. The computed to...
متن کاملAn addendum on "Robust control of robots by the computed torque method"*
We reinterprete and improve recent results on robust control of robots by the computed method. The methods and ideas used are inspired by 'passivity based' control methods for robot manipulators and lead to a significant increase in freedom of controller implementation, thereby providing more flexibility to the designer of robot control systems.
متن کاملAdaptive Computed Torque Computed Reference Control of Flexible Joint Manipulators
Manipulators are controlled to make their end-effector (Tool Centre Point) track a pre-specified trajectory in space. This goal is achieved if the actuators of the manipulator are activated appropriately. The controller, used to calculate these inputs, can have may different forms, each with its own (dis)advantages.
متن کاملControl of underactuated robot manipulators using switching computed torque method: GA based approach
A new concept for controlling of underactuated robot manipulators is presented by using switching computed torque method. One fundamental feature of the present approach is to use the partly stable controllers (PSCs) in order to fulfill the ultimate control objective. Dynamic model of an underactuated robot system is directly analyzed to synthesize partly stable, computed torque controllers wit...
متن کاملImproved Algorithms of Direct Torque Control Method
In the paper a new way of DTC control method analysis to explain flux and current distortion at a low speed of motor operation is discussed. As a result, a new DTC-δ algorithm is proposed. It is important that the DTC-δ algorithm uses the same switching table as the DTC method. The modified DTC algorithms are free from the disadvantages of the conventional DTC method i.e. hexagonal flux and str...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Robotics Society of Japan
سال: 1989
ISSN: 0289-1824,1884-7145
DOI: 10.7210/jrsj.7.3_237