Differential Scanning Calorimetry study on curing kinetics of diglycidyl ether of bisphenol A with amine curing agents for self-healing systems
نویسندگان
چکیده
منابع مشابه
Stability of bisphenol A diglycidyl ether and bisphenol F diglycidyl ether in water-based food simulants
Varnishes used for the inner coatings of food cans are often based on epoxy resins or vinylic organosols. The epoxy resins can be produced from bisphenol A (BPA) and bisphenol F (BPF), and these also contain bisphenol A diglycidyl ether (BADGE) or bisphenol F diglycidyl ether (BFDGE) as stabilising components. These compounds may break down during storage and also by the influence of food simul...
متن کاملProperties and curing kinetics of C21-based reactive polyamides as epoxy-curing agents derived from tung oil
Three C21-based reactive polyamides were synthesized from tung oil and different polyamines. The thermal and mechanical properties of cured products of the C21-based polyamides and diglycidyl ether of bisphenol A (DGEBA) were investigated. It was found that the cured materials were superior to those cured by C36-based polyamides in tensile strength and flexural strength and had a better flexura...
متن کاملEco-friendly Self-curing Concrete Incorporated with Polyethylene Glycol as Self-curing Agent (RESEARCH NOTE)
Today concrete is most generally utilized development material in the world due to its strength and sturdiness properties. To attain good strength, curing of concrete is important so we introduce the concept of self-curing concrete rather than immersion or sprinkle curing to avoid water scarcity. It was observed that water solvent polymers can be utilized as a self-curing agent, i.e. polyethyle...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولSelf-curing with epoxy groups
Isocyanate-free cathodic ED coatings. Most of the resins used in the cathodic electrodeposition (CED) coatings are made from modified epoxy resin and blocked polyisocyanate in which the crosslinking is achieved by polyurethane and polyurea formation. A resin system has been developed that is isocyanate free and avoids not only the toxicity aspect, but also, to a great extent, the weight loss of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Matéria (Rio de Janeiro)
سال: 2017
ISSN: 1517-7076
DOI: 10.1590/s1517-707620170002.0183