Diesel In-Cylinder Measurement Technique Using a Multi-Direction Optically Accessible Engine

A Comparison of Numerical Results for an Optically Accessible HSDI Diesel Engine with Experimental Data

Comparisons between numerical results and experimental data for a homogeneous charge compression ignition (HCCI) engine with optical accessibility are being presented in this paper. The KIVA – 3V program, a general purpose combustion routine, is being enhanced by implementing the optimized Shell model for the ignition process, applying the extended Zeldovich formulation for nitrogen oxide forma...

HCCI operation of an optically accessible diesel engine fuelled with RME fuel

Introduction In order to overcome the pollutant emission limitations the use of homogeneous charge compression ignition (HCCI) mode must be considered in direct injection diesel engine using biodiesel fuel. HCCI mode reduces PM and NOx emissions without penalize the performances [1]. This occurs because the combustion develops with low temperature and burns a premixed air/fuel mixture. Biodiese...

Performance Modeling of Single Cylinder Diesel Engine for Pyrolysis Oil and Diesel Blend using Neural Networks

This investigation is an effort to find best optimization method for diesel engine using blended fuel. Present time, the scarcity of fossil fuel is a serious problem all over the world. So, researchers are trying to find best alternative fuel for that conventional fuel. When we use alternate fuel in diesel engine, we must have to optimize the parameter of diesel engine. The present trend will b...

Properties and use of Moringa oleifera biodiesel and diesel fuel blends in a multi-cylinder diesel engine

Conversion of Diesel Engine to Port Injection CNG Engine Using Gaseous Injector Nozzle Multi Holes Geometries Improvement: A Review

This paper is the representation of the computational and experimental methods of a new injector nozzle for a sequential port injection CNG engine. The objective of this study was to review the previous research in the development of gaseous fuel injector for port injection CNG engine converted from diesel engine. Next, a simulation of the fuel flow of the new injector nozzle was made using FLU...