Die Shape Design and Evaluation of Microstructure Control in the Closed-die Axisymmetric Forging by Using FORGE2 Program.
نویسندگان
چکیده
منابع مشابه
Determination of Load and Strain-Stress Distributions in Hot Closed Die Forging Using the Plasticine Modeling Technique
An axisymmetric hot closed die-forging process has been studied by physical modeling technique using the plasticine. To observe the material flow pattern, layers of plasticine with different colors were used. The normal direction to the layers was considered a principal direction. The strain distribution was obtained by measuring the thickness of the plasticine layers. Based on the strain distr...
متن کاملOptimization of Flash, Billet Dimensions and Friction Factor in Closed Die Cold Forging Process
Three important parameters in designing a closed die for forging process are ratio of width to flash thickness, ratio of height to billet diameter and the friction factor. In this paper the influences of these parameters on the required force for the forging and percentage of die filling were investigated. It was found that by controlling the flash dimension, the material loss is reduced and t...
متن کاملEnhancement of hot forging die life using different methods
Forging dies at high temperatures are under contact pressure, variable mechanical loads and thermal shock, furthermore they should withstand wear and friction in a high level. So, in order to increase die life, the selection of die material, coating and hardness is essential. In this review, various methods used for die life enhancement such as carbide coating, using the super alloy stellite 6 ...
متن کاملNumerical Simulation of Hot Closed Die Forging of a Low Carbon Steel Coupled with Microstructure Evolution
Hot closed die forging is a regular process applied to manufacture metallic components used in supporting and fixing cable conductors in electric power transmission lines. In this forming process, the final microstructure of the workpiece depends on the control of several processing parameters. In this study, simulation of the industrial forging process of a ball hook component was performed us...
متن کاملOptimization of Axisymmetric Extrusion Die Profiles
In this research, optimization process of axisymmetric extrusion dies is proposed. Plastic zone is analyzed using finite element method in the Eulerian system with flow formulation. The die profiles are defined by Bezier curves with six control points. Two effective functions are considered in this research; standard deviation of the strain rate and the rate of energy consumption during extrusi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 1994
ISSN: 0915-1559
DOI: 10.2355/isijinternational.34.755