Die Attach Process Defect Mitigation through Design Improvement on Anvil Block Tooling
نویسندگان
چکیده
منابع مشابه
In-Process Improvement through Defect Data Interpretation
An approach that involves both automatic and human interpretation to correct the software production process during development is becoming important in IBM as a means to improve quality and productivity. A key step of the approach is the interpretation of defect data by the project team. This paper uses examples of such correction to evaluate and evolve the approach, and to inform and teach th...
متن کاملImprovement of Soft Tooling Process Through Particle Reinforcement with Polyurethane Mould
Use of conventional flexible polymeric mould materials yields to longer solidification time of (wax/plastic) patterns in soft tooling process, thereby reducing the rapidity of the process to a great extent, which is not desirable in present competitive market. In this work, approach of particle-reinforcement with mould materials is introduced to reduce the cycle time of Soft tooling process and...
متن کاملDie Attach Film Performance in 3D QFN Stacked Die
Consumer demand for smaller and lighter products in wiresless application with maximum functionality had drive the semiconductor industries toward the developement of 3-dimensional stacked die. One of the key technology is relies on die stacking process. A suitable bonding condition and material set are essential to achieve required reliability performance. This study is to relate the effects o...
متن کاملPrintable Die Attach Adhesives for Substrate-On-Chip Packaging
The dominant trend in packaging DDR DRAM for the future is the face down substrate-on-chip configuration. For this type of package it is critical that the die attach method employed provide precise control of bond line thickness and die tilt, minimal fillet, and prevent contamination of the wire bond pads located on the edge of the center wire bond channel. To date, a film adhesive has been the...
متن کاملFluxless Die Attach by Activated Forming Gas
Eutectic god-tin (Au80Sn20) is widely used as the die-attach material for making radio-frequency (RF) and microwave devices. The metallic bonding is typically achieved by soldering using a gold-tin preform in a forming gas containing hydrogen (H2) and nitrogen (N2) to a peak temperature at 300 ̊C. The performance and reliability of the devices are strongly dependent on the quality of the die-att...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering Research and Reports
سال: 2020
ISSN: 2582-2926
DOI: 10.9734/jerr/2020/v17i217182