Diamond Synthesis on Transition Metal Substrates by MW CVD Method.
نویسندگان
چکیده
منابع مشابه
Synthesis and characterization of transition metal doped ZnSe/ZnS nanocrystals by a rapid photochemical method
In the present work, a one pot, rapid and room temperature photochemical Synthesis of transition metal (TM; Cu, Mn, Cr)-doped ZnSe/ZnS core/shell nanocrystals (NCs) was reported. FT-IR spectrum confirmed the capping of ZnSe by thioglycolic acid. XRD and TEM analysis demonstrated zinc blende phase NCs with an average size of around 3 and 5 nm for TM:ZnSe and TM:ZnSe/ZnS NCs, respectively. PL spe...
متن کاملNovel Diamond Films Synthesis Strategy: Methanol and Argon Atmosphere by Microwave Plasma CVD Method Without Hydrogen
Diamond thin films are grown on silicon substrates by only using methanol and argon mixtures in microwave plasma chemical vapor deposition (MPCVD) reactor. It is worth mentioning that the novel strategy makes the synthesis reaction works smoothly without hydrogen atmosphere, and the substrates temperature is only 500 °C. The evidence of surface morphology and thickness under different time is o...
متن کاملElectrical characterization of CVD diamond thin films grown on silicon substrates
Diamond thin films grown on high resistivity, (100) oriented silicon substrates by the hot filament chemical vapor deposition (HFCVD) method have been characterized by four-point probe and current-voltage (through film) techniques. The resistivities of the as-grown, chemically etched and annealed samples lie in the range of 1 O* fl cm to 10’ 0 cm. The Raman measurements on these samples indicat...
متن کاملNucleation Kinetics of Diamond on Carbide-forming Substrates during Cvd — I. Transient Nucleation Stage
This paper presents a theoretical study on the initial stage of diamond nucleation during CVD. A kinetic model is developed to investigate the time evolution of diamond nucleation on carbide-forming substrates. The calculated results provide some insight into the effects of substrate materials, surface diffusion and adsorption state on diamond nucleation kinetics. Full-length manuscript of the ...
متن کاملMurakami and H2SO4/H2O2 Pretreatment of WC-Co Hard Metal Substrates to Increase the Adhesion of CVD Diamond Coatings
Distinct improvement in adhesion of diamond coatings on hard metal substrates was achieved by following substrate surface pretreatment [I]: First WC was removed from the substrate surface by etching with Murakami solution (K3[Fe(CN)6] in KOH), after which the Co binder network was etched with H2S04/H202 solution. Then diamond coatings were deposited on the substrates by hot-filament CVD. Appare...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1992
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.43.716