Diamond-like carbon graphene nanoplatelet nanocomposites for lubricated environments
نویسندگان
چکیده
The tribological behaviour of diamond-like carbon (DLC) and graphene nanoplatelets (GNP) nanocomposite has not been previously explored in a lubricated environment, with some previous studies reporting only on materials the surface DLC. In this study DLC-GNP films various GNP coverages were synthesised by 3 step process: spin coating suspension, heat treatment, DLC deposition. study, effect coverage mechanical properties, response film studied at elevated temperatures against cast iron pin base-oil environment. shows decrease friction wear nanocomposites as increased, lowest (COF ∼0.03) (∼1.6 × 10−19 m3/Nm−1) achieved 4.5% coverage. This reports addition into matrix reduced both creating highly graphitic transfer counter-body, but for higher agglomeration during islands recorded, leading to removal sliding negating reduction GNP.
منابع مشابه
Diamond, Diamond-Like Carbon (DLC) and Diamond-Like Nanocomposite (DLN) Thin Films for MEMS Applications
متن کامل
Graphene-nanoplatelet-based photomechanical actuators.
This paper reports large light-induced reversible and elastic responses of graphene nanoplatelet (GNP) polymer composites. Homogeneous mixtures of GNP/polydimethylsiloxane (PDMS) composites (0.1-5 wt%) were prepared and their infrared (IR) mechanical responses studied with increasing pre-strains. Using IR illumination, a photomechanically induced change in stress of four orders of magnitude as ...
متن کاملDiamond-like carbon for magnetic storage disks
Diamond-like carbon films form a critical protective layer on magnetic hard disks and their reading heads. The ultimate limit to storage density is the super-paramagnetic limit, where the thermal energy is able to overcome the coercive energy of the magnetic bit. Perpendicular recording should allow storage densities up to ;1 Tbityinch . This requires the read head to approach 2 closer to the m...
متن کاملDiamond-like carbon coating under oleic acid lubrication: Evidence for graphene oxide formation in superlow friction
The achievement of the superlubricity regime, with a friction coefficient below 0.01, is the Holy Grail of many tribological applications, with the potential to have a remarkable impact on economic and environmental issues. Based on a combined high-resolution photoemission and soft X-ray absorption study, we report that superlubricity can be realized for engineering applications in bearing stee...
متن کامل24 Tribology of Diamond , Diamond - Like Carbon , and Related Films
Diamond, diamond-like carbon (DLC), and other related materials (i.e., carbon nitride and cubic boron nitride [CBN]) are some of the hardest materials known and offer several other outstanding properties, such as high mechanical strength, chemical inertness, and very attractive friction and wear properties, that make them good prospects for a wide range of tribological applications, including r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Carbon
سال: 2023
ISSN: ['0008-6223', '1873-3891']
DOI: https://doi.org/10.1016/j.carbon.2023.01.061