Diamond Like Carbon Deposition by Inverted Fireballs

Effect of bias voltage on structural and mechanical characteristics of diamond-like carbon thin film applied by ion beam deposition

This study, investigates the effect of bias voltage on structural changes of diamond-like carbon thin film created by ion beam deposition is investigated. For this purpose, the bias voltage in the values of 0 V, -50 V, -100 V and -150 V on the AA5083 aluminum alloy was considered. Raman spectroscopy was used to evaluate structural. Influence of the bias voltage on the thickness and roughness of...

Phase-graded deposition of diamond-like carbon on nanotips by near-field induced chemical vapor deposition

Deposition of Diamond-like Carbon films using Dense Plasma Focus

Diamond Like Carbon (DLC) films were deposited on quartz substrates using Dense Plasma Focus (DPF) method. The formation of sp bonds as is it’s content in the film strongly depends on the substrate and it seems quartz is not a suitable substrate. However, we report here the formation of DLC films on quartz substrates that were maintained at elevated temperatures and show the content of carbon a...

Deposition and characterization of ultra thin diamond like carbon films

Amorphous hydrogenated and/or nitrogenated carbon films, a-C:H/a-C:N, in overall thickness up to 2 nm are materials of choice as a mechanical and corrosion protection layer of the magnetic media in modern hard disk drive disks. In order to obtain high density and void-free films the sputtering technology has been replaced by different plasma and ion beam deposition techniques. Hydrocarbon gas p...

Nitrogen and Aluminum Doped Diamond-like Carbon Thin Films by Dc Magnetron Sputtering Deposition

Diamond-like carbon (DLC) thin films used in this study were prepared with DC magnetron sputtering deposition. Silicon (100) wafers were used as the substrates onto which an RF bias was applied during the film deposition. For the nitrogen doped DLC films, a pure graphite target was used as the carbon source and nitrogen gas was introduced into the deposition chamber via a mass flow controller. ...