DEVICE FOR RESEARCHES OF MAGNETIC FIELD IMPACT UPON “WHEEL-RAIL” FRICTION PAIR CHARACTERISTICS
نویسندگان
چکیده
منابع مشابه
Impacts of Wheel–rail at Railway Turnouts
Investigation of vertical vibrations of a railway turnout is important in designing track components under moving loads of trains. In this paper, the turnout is simulated by a linear finite element model with modal damping. A section of the turnout has a length of 36 sleeper spans surrounding the crossing. Rails and sleepers are modeled with uniform Rayleigh-
Timoshenko beam elements. The ra...
متن کاملImpacts of Wheel–rail at Railway Turnouts
Investigation of vertical vibrations of a railway turnout is important in designing track components under moving loads of trains. In this paper, the turnout is simulated by a linear finite element model with modal damping. A section of the turnout has a length of 36 sleeper spans surrounding the crossing. Rails and sleepers are modeled with uniform Rayleigh- Timoshenko beam elements. The rail...
متن کاملEffects of rail dynamics and friction characteristics on curve squeal
Curve squeal in railway vehicles is an instability mechanism that arises in tight curves under certain running and environmental conditions. In developing a model the most important elements are the characterisation of friction coupled with an accurate representation of the structural dynamics of the wheel. However, the role played by the dynamics of the rail is not fully understood and it is u...
متن کاملDevelopment of Friction Moderating System to Improve Wheel/Rail Interface in Sharp Curves
Lubrication on sharp curves has been commonly adopted as a method of reducing friction between the wheel flange and rail gauge face to minimize wear and energy consumption. Additionally, lubrication between the running surface of the low-rail and the wheel tread has recently been recognized as a significant factor in reducing the likelihood of low-rail corrugation, squealing noise and rail gaug...
متن کاملWheel-Rail Profile Condition Monitoring
Increased railway patronage worldwide is putting pressure on rolling stock and infrastructure to operate at higher capacity and with improved punctuality. Condition monitoring is seen as a contributing factor in enabling this and is highlighted here in the context of rolling stock being procured with high capacity data buses, multiple sensors and centralised control. This therefore leaves scope...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Bryansk state technical university
سال: 2020
ISSN: 1999-8775
DOI: 10.30987/1999-8775-2020-2020-1-34-39