Development of W-Cu System Alloy for Heat Sinks by MIM Techniques.
نویسندگان
چکیده
منابع مشابه
Production of W-Cu-Ni Alloy and Cu Bimetal by SPS Process and Analysis of Process Parameters
This study aims at investigating changes in microstructure and strength of W alloy and Cu bimetals with varying spark plasma sintering (SPS) temperature and percentage of copper in W-Cu-Ni alloy. After SPS of W (12 wt%)-Cu (14 wt%)-Ni (3 wt%) alloy powder into consolidated discs at 1350 ° C, they were spark plasma sintered to copper discs at various temperatures. Assessment of the interface mic...
متن کاملModelling and simulation techniques for forced convection heat transfer in heat sinks with rectangular fins
This paper provides a comprehensive description of the thermal conditions within a heat sink with rectangular fins under conditions of cooling by laminar forced convection. The analysis, in which increasing complexity is progressively introduced, uses both classical heat transfer theory and a computational approach to model the increase in air temperature through the channels formed by adjacent...
متن کاملOptimal Finned Heat Sinks
In a multi-board computer system, the volume allocated for heat removal is often a significant fraction of the total system volume. Cooling requirements can thus impact performance, reliability, cost, acoustic noise, and floorspace. This work addresses the volume costs or space requirements for removing heat with optimally designed finned heat sinks. Simple formulas applicable to both gas and l...
متن کاملstudy of cohesive devices in the textbook of english for the students of apsychology by rastegarpour
this study investigates the cohesive devices used in the textbook of english for the students of psychology. the research questions and hypotheses in the present study are based on what frequency and distribution of grammatical and lexical cohesive devices are. then, to answer the questions all grammatical and lexical cohesive devices in reading comprehension passages from 6 units of 21units th...
DEVELOPMENT OF A TUNGSTEN HEAVY ALLOY, W-Ni-Mn, USED AS KINETIC ENERGY PENETRATOR
Abstract: The objective of this research was to develop a tungsten heavy alloy (WHA) having a microstructure and properties good enough to penetrate hard rolled steels as deep as possible. In addition this alloy should not have environmental problems as depleted uranium (DU) materials. For this purpose a wide spread literature survey was performed and on the base of information obtained in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2002
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.49.531