Development of ultra-fast data acquisition system for electrical resistivity surveys
نویسندگان
چکیده
منابع مشابه
Fast computation of optimized electrode arrays for 2D resistivity surveys
Four different methods to automatically select an optimal set of array configurations that gives the maximum resolution of the subsurface with a limited number of measurements for 2D electrical imaging surveys were tested. The first method (CR method) directly calculates the change in the model resolution for each new array added to the base data set, and uses this to select array configuration...
متن کاملFast Data Acquisition System for Impedance Tomography
In the paper concept of the measurement (based on the sampling of potential differences during one period of the measuring signal) for impedance tomography data acquisition is described. Proposal of elimination of influence of dc electrochemical potential on data acquisition system is given in the paper as well. Thus suggested method enables increasing the rate of measurement. Results of experi...
متن کاملElectrical resistivity surveys of anthropogenic karst phenomena, southeastern New Mexico
A small but significant number of sinkholes and other karst phenomena in southeastern New Mexico are of human origin and are often associated with solution mining of salt beds in the shallow subsurface. In 2008 two brine wells in a sparsely populated area of northern Eddy County, New Mexico, abruptly collapsed as a result of solution mining operations. The well operators had been injecting fres...
متن کاملInversion of Electrical Resistivity Data: A Review
High density electrical prospecting has been widely used in groundwater investigation, civil engineering and environmental survey. For efficient inversion, the forward modeling routine, sensitivity calculation, and inversion algorithm must be efficient. This paper attempts to provide a brief summary of the past and ongoing developments of the method. It includes reviews of the procedures used f...
متن کاملDC resistivity surveys
Using the same colour scheme as the flow diagram above, Figure 2 shows how this conceptual framework applies for DC methods. The energy source is a pair of electrodes that inject a well-known current into the ground at known locations (Fig. 2a). The earth affects this energy because variations in the electrical conductivity of subsurface structures will bend the current flow lines (Fig. 2b). Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUTSURI-TANSA(Geophysical Exploration)
سال: 2007
ISSN: 0912-7984,1881-4824
DOI: 10.3124/segj.60.515