Development of Synthetic Slag with Marble Waste and Calcium Aluminate Agents for Cast Iron Desulfurization
نویسندگان
چکیده
منابع مشابه
Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents
In present research, the foam glass-ceramic composites fabricated by window glass, steel slag and SiC, CaCO3 foaming agents were investigated by press–sintering method. The optimum sintering temperature was obtained at 1200°C with a 3-minutes holding time and 20°C/min heating rate. The optimum pressure level of 80 MPa for achieving the 70 % of relative density was selected. The effec...
متن کاملInvestigations of Calcium Aluminate Slag Penetration to MgO Monolithic Refractories in Steelmaking Process
In this study, slag penetration into a magnesia refractory monolithic was investigated by the crucible test method. A synthetic calcium aluminate slag system has been used to study commercial magnesia mix refractory for 1, 2, 3, 4, 5 and 6 hours at 1450°C and 1600°C. It has been shown that the penetration rate is controlled by a diffusion mechanism at 1450°C. In this case, capillaries are the ...
متن کاملInvestigation of the effect of phosphate on the physical and microstructural properties of synthetic calcium aluminate cement
The aim of this study was to investigate the synthesis of calcium aluminate cement with and without phosphate additive by combustion synthesis. After preparing the gel from a solution containing aluminum and calcium nitrates and glycine fuel and ammonium dihydrogen Phosphate, its combustion was performed at 400 ° C. X-ray diffraction pattern and thermal analysis of the combustion sample showed...
متن کاملUtilization of Dry Calcium Based Flue Gas Desulfurization Waste as a Hazardous Waste Fixation Agent
includes materials such as waste oil, solvents, and some boiler cleaning fluids which have a heating value. There is at least one boilcleaning product that has a positive heating value. During the boiler cleaning process, the fluid is collected in a temporary storage tank, after the cleaning process is completed it is reinjected into the boiler as essentially an additional heat input to the boi...
متن کاملNDT of Ductile Cast Iron from Nuclear Waste Storage Canisters
The concept for geological disposal of nuclear waste and spent nuclear fuel relies on a multi-barrier system with the copper/cast iron canister as the first barrier. The canister is designed to retain its integrity for at least 100000 years, which means that future glaciations need to be considered. A thick ice block together with hydrostatic pressure from groundwater would produce hydrostatic ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2017
ISSN: 1980-5373,1516-1439
DOI: 10.1590/1980-5373-mr-2016-0834