Development of Sub-Zero Hardening Stainless Steels.
نویسندگان
چکیده
منابع مشابه
High-Alloy Ferritic Steels: Martensitic Stainless Steels, Precipitation Hardening (code 1810)
This report may be updated and revised periodically in response to the needs of the technical community; up-to-date versions can be requested from the editors at the address given below or downloaded at http://www.ca.sandia.gov/matlsTechRef/. The content of this report will also be incorporated into a Sandia National Laboratory report (SAND2008-1163); the most recent version can be obtained fro...
متن کاملDevelopment of Alumina-Forming Austenitic Stainless Steels
This paper presents the results of the continued development of creep-resistant, alumina-forming austenitic (AFA) stainless steel alloys, which exhibit a unique combination of excellent oxidation resistance via protective alumina (Al2O3) scale formation and high-temperature creep strength through the formation of stable nano-scale MC carbides and intermetallic precipitates. Efforts in fiscal ye...
متن کاملSecondary Hardening Behavior in Super Duplex Stainless Steels during LCF in Dynamic Strain Ageing Regime
Cyclic deformation behaviors in five modified duplex and 350°C. The influence of temperature and ni phenomenon, in the stress response curve was focuse dynamic strain ageing by increasing the first hardeni Furthermore, an increase in nitrogen concentration in ageing temperature range. The occurrence of strai structures. The formation of irreversible dislocation s hardening in the stress respons...
متن کاملDuplex Hardening of Steels for Aeroengine Bearings
Duplex hardening is a process in which conventional heat-treatments such as secondary or case hardening are followed up by surface nitriding to achieve exceptional properties, particularly in the context of aeroengine bearings. Hardness values in excess of 1 000 HV can in principle be achieved, and although the hardness decreases as a function of depth below the surface, some level of enhanceme...
متن کاملLow-Temperature Carburization of Austenitic Stainless Steels
LOW-TEMPERATURE CARBURIZATION is a gaseous carburization process performed at atmospheric pressure, at temperatures where the kinetics of substitutional diffusion are very slow. Low-temperature carburization hardens the surface of austenitic stainless steels through the diffusion of interstitial carbon, without the formation of carbides. The surface must be activated, by modification and remova...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the Japan Institute of Metals
سال: 1992
ISSN: 0021-4426,1884-5835
DOI: 10.2320/materia1962.31.318