Development of Stereolithography Apparatus by using UV-LED
نویسندگان
چکیده
منابع مشابه
UV-LED photopolymerised monoliths.
For the first time photopolymerisation of polymer monoliths has been realised with UV-light emitting diodes (LEDs) as light source and demonstrated with polymethacrylate monoliths created in fused silica capillaries and plastic chips.
متن کاملDevelopment and future of ultraviolet light-emitting diodes: UV-LED will replace the UV lamp
Ultraviolet light-emitting diodes (UV-LEDs) have started replacing UV lamps. The power per LED of high-power LED products has reached 12 W (14 A), which is 100 times the values observed ten years ago. In addition, the cost of these high-power LEDs has been decreasing. In this study, we attempt to understand the technologies and potential of UV-LEDs.
متن کاملDevelopment of a 3D printer using scanning projection stereolithography
We have developed a system for the rapid fabrication of low cost 3D devices and systems in the laboratory with micro-scale features yet cm-scale objects. Our system is inspired by maskless lithography, where a digital micromirror device (DMD) is used to project patterns with resolution up to 10 µm onto a layer of photoresist. Large area objects can be fabricated by stitching projected images ov...
متن کاملthe effect of using visual aids on the development of speech act of disagreement among iranian intermediate efl learners
abstract the present study tried to investigate the effect of visual aids (films) on the development of the speech act of disagreement among iranian efl intermediate learners. to this end, the researcher selected 40 homogeneous intermediate learners based on their scores on oxford placement test. .the subjects then divided into control group and experimental group. both classes were tested by ...
UV-curable Encapsulants for LED
UV cured epoxy systems represent complementary technology to the established heat cured epoxy systems for coating, adhesion and encapsulation of electronic devices. The UV cured epoxy systems offer significant benefits in terms of fast cure and thus very short production cycle time; low stress and better colour due to room temperature cure; process wise no mix ratio problem or anhydride handlin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society of Manufacturing Process Engineers
سال: 2014
ISSN: 1598-6721
DOI: 10.14775/ksmpe.2014.13.2.015