Development of Simple Passive Neutron Dosimeter with Cylindrical Acrylic Resin Moderator Using Thermoluminescent Detector
نویسندگان
چکیده
منابع مشابه
A Novel Neutron Dosimeter
Background: Neutron contamination in our environment can cause harmful biological effects on human body. Therefore, many efforts have been made to construct a neutron dosimeter to estimate the received dose. Objective: To design a simple neutron dosimeter. Methods: The primary dosimeter had 3He as a spherical thermal neutron detector encircled by paraffin 10 cm in radius. Then, the paraffin sph...
متن کاملNeutron Moderator Development Research at the Low Energy Neutron Source
The Low Energy Neutron Source at Indiana University completed its construction phase roughly three years ago, and one of the more active research thrusts at the facility since that time has been our attempts to advance the state of the art in neutron moderation. This research program includes basic materials characterization, especially total neutron cross section measurements, as well as in-si...
متن کاملPassive neutron area monitor with CR39
Background: In high-intensity, mixed and pulsed neutron fields the use of spectrometers or area monitors with active detectors is useless in these conditions neutron measuring devices must have a passive detector. Here a passive neutron area monitor with CR39 track detector was designed and the response was calculated. Materials and Methods: The response of a passive neutron area monitor with C...
متن کاملUse of light source for testing thermoluminescent dosimeter readers.
It is a common practice to check the performance of a TLD reader by inserting a light source composed of a phosphor mixed with a radioactive material, e.g., 14C . The response to the light source is used as a measure of a) the calibration or long-term stability of the reader and b) the ability of the reader to reproduce a constant signal. Usually the laboratory which measures a wide range of do...
متن کاملComparison of Water Sorption of Two Injection Acrylic Resins with a Conventional Pressure-Packed Acrylic Resin
Background and Aim: Water sorption is one of the most important properties that affects the quality of a prosthesis, and subsequently, the quality of treatment, and pa-tient’s quality of life. The aim of this study was to determine and compare the water sorption of two types of poly methyl methacrylate (PMMA) using the injection-molding systems with a traditional acrylic resin base material. M...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RADIOISOTOPES
سال: 2005
ISSN: 1884-4111,0033-8303
DOI: 10.3769/radioisotopes.54.287