Development of Siloxane Coating with Oxide Fillers for Kesteritic (CZTS) Photovoltaic Systems
نویسندگان
چکیده
منابع مشابه
SiC protective coating for photovoltaic retinal prosthesis.
OBJECTIVE To evaluate plasma-enhanced, chemically vapor deposited (PECVD) amorphous silicon carbide (α-SiC:H) as a protective coating for retinal prostheses and other implantable devices, and to study their failure mechanisms in vivo. APPROACH Retinal prostheses were implanted in rats sub-retinally for up to 1 year. Degradation of implants was characterized by optical and scanning electron mi...
متن کاملOptimal Controller for Single Phase Island Photovoltaic Systems
Increasing of word demand load caused a new Distributed Generation (DG) to enter to powersystem. One of the most renewable energy is the Photovoltaic System. It is beneficial to use thissystem in both separately as well as connected to power system using power electronics interface.In this paper an optimal PID controller for Photovoltaic System systems has been developed. Theoptimization techni...
متن کاملazerbaijans political development after the collapse of soviet union and implication on relation with the islamic republic of iran
در فصل اول این پایاین نامه در خصوص تاریخ کشور اذربایجان قبل و بعد از جدایی این کشور از ایران مورد بررسی قرار گرفته است ودر فصل دوم تحولات سیاسی این کشور بعد از 1991 و در واقع بعد از فروپاشی شوروی و دولتهایی که روی کار امدند در از جمله دولت ابولفضل ایلچی بیگ،دولت حیدر علی اف وبعد از او پسرش الهام علی اف و نگرش هرکدام از این دولتها به سیاسیت خارجی اذربایجان مورد اشاره قرار گرفته است.در ودر فصل سو...
Development of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell
The bare and pre-oxidized AISI 430 pieces were screen printed by copper ferrite spinel coatings. Good bonding between the coating and the substrate was achieved by the reactive sintering process of the reduced coating. The energy dispersive X-ray spectroscopy (EDS) analysis revealed that the scale is a double layer consisting of a chromia-rich subscale and an outer Cu/Fe-rich spinel. The result...
متن کاملDevelopment of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell
The bare and pre-oxidized AISI 430 pieces were screen printed by copper ferrite spinel coatings. Good bonding between the coating and the substrate was achieved by the reactive sintering process of the reduced coating. The energy dispersive X-ray spectroscopy (EDS) analysis revealed that the scale is a double layer consisting of a chromia-rich subscale and an outer Cu/Fe-rich spinel. The result...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2021
ISSN: 1996-1073
DOI: 10.3390/en14082142