Development of Self-lubricating Wear-Resistant Materials Through MIM Process.

Self-lubricating, low-friction, wear-resistant Al-based quasicrystalline coatings

After gas atomization, a quasicrystalline powder based on aluminium was used to prepare a thick coating by high-velocity oxygen-fuel flame torch spraying. This layer was deposited on top of a bond-coat layer on a steel plate. A post-spraying annealing treatment turned the two layers to their stable state, a γ-brass crystal and an icosahedral quasicrystal, respectively. The projection parameters...

Friction and Wear of Self-Lubricating Materials for Hydropower Applications under Different Lubricating Conditions

Self-lubricating bearings in hydropower applications are often lubricated with water under boundary lubricating conditions. Polyhydric alcohols replacing water have shown the potential to reduce both friction and wear. The objective of this work is, therefore, to evaluate the effect of a polyhydric alcohol-based environmentally-acceptable lubricant (EAL) on the friction and wear of self-lubrica...

High Temperature Self-Lubricating Materials

Application of the Self-Organization Phenomenon in the Development of Wear Resistant Materials - A Review

Application of the phenomenon of self-organization for the development of wear resistant materials has been reviewed. For this purpose the term of self-organization and dissipative structures as applied to tribology have been discussed. The applications of this phenomenon have been shown in order to develop new wear resistantand antifriction materials. Specific examples have been shown for the ...

Wear and Friction Analysis of Sintered Metal Powder Self Lubricating Bush Bearing

Abstract—Powder metallurgy (P/M) is the only economic way to produce porous parts/products. P/M can produce near net shape parts hence reduces wastage of raw material and energy, avoids various machining operations. The most vital use of P/M is in production of metallic filters and self lubricating bush bearings and siding surfaces. The porosity of the part can be controlled by varying compacti...