Development of Precipitation Hardened Ferrite and Martensite Dual Phase Steel for Automotive Wheel.
نویسندگان
چکیده
منابع مشابه
Crystallographic Analysis of Lath Martensite in Ferrite-Martensite Dual Phase Steel Sheet Annealed after Cold-Rolling
The martensite steels produced by quenching and tempering has been used for machine structural use. Martensite in ferrite-martensite dual-phase steels (hereinafter, DP steels) also has important roll in strengthening of the automobile steel sheets. Therefore the importance of analyzing the microstructure and their mechanical properties of the martensite has been increased year by year. Many res...
متن کاملThe Effect of Ferrite Grain Size on the Fatigue Behavior of Ferrite-martensite Dual-phase Steels
The effect of ferrite grain size on the fatigue and tensile properties of dual phase steels with a 0.25 volume fraction of martensite (Vm) under different heat treatments was investigated. The heat treatments were homogenized at 1200 oC along with several subsequent normalizations at 910 oC, resulting in different microstructures and mechanical properties. After heat treatment, the obtained ste...
متن کاملthe effect of ferrite grain size on the fatigue behavior of ferrite-martensite dual-phase steels
the effect of ferrite grain size on the fatigue and tensile properties of dual phase steels with a 0.25 volumefraction of martensite (vm) under different heat treatments was investigated. the heat treatments werehomogenized at 1200 oc along with several subsequent normalizations at 910 oc, resulting in differentmicrostructures and mechanical properties. after heat treatment, the obtained steels...
متن کاملCopper Precipitation Hardened, High Strength, Weldable Steel
Steel containing 0.03% carbon, 1.35% copper and 0.84% nickel had yield strength in the 540-625 MPa (78-90 Ksi) range depending on thickness, ultimate tensile strength in the 625-690 MPa (90100 Ksi) range, and 25-30% elongation when air cooled after hot rolling. No brittle heat-affected zone was formed during manual or automatic submerged arc welding without pre-heating or postheating. The fract...
متن کاملA Phase Transformation Model for the Austenitisation of Martensite in Dual-Phase Steel
This work presents a unique approach for the modelling of the austenitisation of martensite in dual-phase steels within the phase-field method. Driving forces for nucleation and growth are derived from thermodynamic databases. Routines for nucleation are based on a discretisation of the classical nucleation theory. Validation is given via dilatometric experiments.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 1998
ISSN: 1340-2625,1884-5843
DOI: 10.2320/materia.37.513