Development of plasma MIG brazing process for dissimilar metal joining of aluminum to steel
نویسندگان
چکیده
منابع مشابه
Effect of Welding Heat Input on the Intermetallic Compound Layer and Mechanical Properties in Arc Welding-brazing Dissimilar Joining of Aluminum Alloy to Galvanized Steel
The effect of weld heat input on the formation of intermetallic compound (IMCs) layer during arc welding–brazing of aluminium and steel dissimilar alloys, was investigated through both finite element method (FEM) numerical simulations and experimental measurements. The results of FEM analysis as well as welding experiments indicated that increasing weld heat input increases the thickness of IMC...
متن کاملoptimum brazing conditions for joining commercially pure titanium to 304l stainless steel using bag-8 silver filler metal
joining of titanium alloys to other materials especially steels has attracted much attention in recent years due to the exceptional properties of titanium such as excellent corrosion resistance and mechanical properties and its increasing application in various industries. according to the fe-ti binary phase diagram, these two elements do not have complete solubility. this leads to difficulties...
متن کاملEffect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding
The purpose of this study was to examine the effect of adding Nano particles such as Nano Carbon Tube during Friction Stir Welding (FSW) on dissimilar Al alloy joints. More specifically, both FSW and Friction Stir Processing (FSP) were performed simultaneously to investigate the effect of adding Nano particles on mechanical properties and microstructure of the weld zone for joining AA5754-H22 a...
متن کاملEffect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding
The purpose of this study was to examine the effect of adding Nano particles such as Nano Carbon Tube during Friction Stir Welding (FSW) on dissimilar Al alloy joints. More specifically, both FSW and Friction Stir Processing (FSP) were performed simultaneously to investigate the effect of adding Nano particles on mechanical properties and microstructure of the weld zone for joining AA5754-H22 a...
متن کاملAn Investigation of the Microstructure of an Intermetallic Layer in Welding Aluminum Alloys to Steel by MIG Process
Butt joints of A5052 aluminum alloy and SS400 steel, with a new type of chamfered edge, are welded by means of metal inert gas welding and ER4043 Al-Si filler metal. The microhardness and microstructure of the joint are investigated. An intermetallic layer is found on the surface of the welding seam and SS400 steel sheet. The hardness of the intermetallic layer is examined using the Vickers har...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2014
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/61/1/012018