Development of Oxygen Blast Furnace Process with Preheating Gas Injection into Upper Shaft

Development of Blast Furnace Burden Distribution Process Modeling and Control

1) School of Automation and Electrical Engineering, University of Science and Technology Beijing, Beijing, 100083 China. 2) Key Laboratory of Advanced Control of Iron and Steel Process (Ministry of Education), University of Science and Technology Beijing, Beijing, 100083 China. 3) Department of Electrical & Computer Engineering, Missouri University of Science and Technology, Rolla, MO, 65409-00...

Blast Furnace Granular Coal Injection Project

Hybrid Intelligent Control for Optimal Operation of Shaft Furnace Process

The extensively used shaft furnace in the ore concentration industry is an important facility that turns the weak-magnetic low-grade hematite ore into strong-magnetic one. During the operation of the shaft furnace roasting process, the optimal control objective is to control the technique indices, namely the magnetic tube recovery ratio (MTRR) that represents the quality, the efficiency, and th...

Blast Furnace Granular Coal Injection System Demonstration Project

The Clean Coal Technology (CCT) Demonstration Program is a government and industry co-funded effort to demonstrate a new generation of innovative coal utilization processes in a series of " showcase " facilities built across the country. These projects are carried out on a sufficiently large scale to prove commercial worthiness and generate data for design, construction, operation, and technica...

Multivariate process monitoring of an experimental blast furnace

Process monitoring by use of multivariate projection methods has received increasing attention as it can reduce the monitoring problem for richly instrumented industrial processes with many correlated variables. This article discusses the monitoring and control of a continuously operating experimental blast furnace (EBF). A case study outlines the need for monitoring and control of the EBF and ...