Development of One-side Galvanizing Process Using Stop-off Coating Method in Continuous Inline-anneal Type Hot Dip Galvanizing Line

Exploring Carbide-Free Bainitic Structures for Hot Dip Galvanizing Products

A new Model and Control of Coating Process at Galvanizing line

This paper proposes a new practical synthesis model for coating weight control and robust design method of feedback controller in galvanizing process. The model combines both long term and short term model. Long term model have a function of classification, averaging and learning based on real measured data. Short term model is differential model based on linear change of inputs and outputs. A ...

Effect of Mg on the Microstructure and Corrosion Resistance of the Continuously Hot-Dip Galvanizing Zn-Mg Coating

The microstructure of continuously hot-dip galvanizing Zn-Mg coating was investigated in order to obtain the mechanism of the effects of Mg on the corrosion resistance. In this paper, the vertical section of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner was calculated. The results indicates that the phase composition of the Zn-0.20 wt % Al-Mg ternary phase diagram near the...

REACTION KINETICS OF THE FORMATION OF INTERMETALLIC Fe – Zn DURING HOT - DIP GALVANIZING OF STEEL

P. Pokorny, J. Kolisko, L. Balik – Czech Technical University – Klokner Institute, Prague, Czech Republic P. Novak – Institute of Chemical Technology, Prague, Czech Republic This review article mainly describes the composition of intermetallic Fe Zn, i.e. zeta (ζ), delta (δ1k + δ1p), gamma1 (Γ1) and gamma (Γ) on galvanized steel during low temperature galvanization (t ~ 450 °C). It gives detail...

Some Applications of Neural Networks for Condition Monitoring in Industrial Systems for Hot Dip Zinc Galvanizing

The paper describes the abilities of some particular neural network structures (NNS) to provide condition monitoring in a real industrial system, designated for hot dip zinc galvanizing. Condition assessment of a molten zinc bath furnace, and more specifically analysis and prediction of the technical condition in galvanizing kettle walls are also developed in this paper.