Development of Non-Scallop Block Joint Welding Method
نویسندگان
چکیده
منابع مشابه
Development of Compositions of Aluminium Welding Fluxes Using Statistical Method
This paper describes the process of developing a model that relates the shear stresses in a gas welded aluminium alloy weldment with the corresponding flux constituent elements that make up the flux composition. This model, considering the initial composition ranges, from where 13 flux compositions were formulated and their shear stresses determined and transformed into a model. This model was ...
متن کاملAN INFLUENCE OF PHASE DEVELOPMENT ON MECHANICAL STRENGTH OF ALUMINA-COPPER JOINT PREPARED BY MOLYMn METHOD
Abstract: The effect of phase development on peel strength of alumina-copper metalized joint has been investigated. The alumina-copper joint was prepared in three stages. The alumina substrate was, first, metalized at 1500°C in H2-furnace by a new formulation. In the second step, a nickel layer was electroplated on the metalized layer with approximately 10µm thickness. Finally, copper strip...
متن کاملThe effect of activating fluxes on 316L stainless steel weld joint characteristic in TIG welding using the Taguchi method
Gas tungsten arc welding is fundamental in those industries where it is important to control the weld bead shape and its metallurgical characteristics. However, compared to the other arc welding process, the shallow penetration of the TIG welding restricts its ability to weld thick structures in a single pass (~ 2 mm for stainless steels), thus its productivity is relativity low. This is why th...
متن کاملStudy the Profile Shape and Mechanical Properties of Bonded Joint HNV3 to Nimonic 80A Superalloy with Inertia Friction Welding Method
This Paper presents the welding parameterchr('39')s effect (forging pressure, welding time) on macrostructure and mechanical properties of friction welding valve steel HNV3 to Nimonic 80A super alloy. For this purpose, two rods with 20 mm diameters are prepared and with using different parameters (Increase forging pressure and welding time) by friction welding method are welded together. Tensil...
متن کاملStudy the Profile Shape and Mechanical Properties of Bonded Joint HNV3 to Nimonic 80A Superalloy with Inertia Friction Welding Method
This Paper presents the welding parameterchr('39')s effect (forging pressure, welding time) on macrostructure and mechanical properties of friction welding valve steel HNV3 to Nimonic 80A super alloy. For this purpose, two rods with 20 mm diameters are prepared and with using different parameters (Increase forging pressure and welding time) by friction welding method are welded together. Tensil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korea Academia-Industrial cooperation Society
سال: 2014
ISSN: 1975-4701
DOI: 10.5762/kais.2014.15.9.5419