Development of Niobium Microalloyed Steel for Railway Wheel with Pearlitic Bainitic Microstructure

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Discussion on the Rate Controlling Process of Coarsening of Niobium Carbonitrides in a Niobium Microalloyed Steel

Austenite grain growth in microalloyed steels is governed by the coarsening of fine precipitates present at grain boundaries below the grain coarsening temperature. Zener model is widely used in metals to describe the pinning effect of second phase particles precipitated in the matrix. In this work it has been discussed whether grain boundary or volume diffusion is the rate controlling process ...

متن کامل

Microstructure Evolution during Tensile Deformation of a Nanostructured Bainitic Steel

In situ neutron diffraction experiment was used during tensile testing at room temperature to examine the changes on the percentage and texture of both ferrite and austenite in a nanocrystalline bainitic steels transformed at two different temperatures 200°C and 300oC for different times to achieve the same phase percentages. Both samples showed an inadequate capability of austenite to transfor...

متن کامل

A Study to Predict the Development of Wear for the Wheel/interface of a Railway Track

The train transport is often confronted with greatly repeated changes in scope, vehicle travel well-being and transport safety because of the adjustments of wheel and rail profiles. These problems are frustrating and threatening. Thus, there is a requirement for an approach to predicting the wear of wheel/rail to tackle these problems. A new theoretical ground is broken through the build-up a m...

متن کامل

Development of Ultrafine Bainitic Structure in AISI 431 Stainless Steel

The development of ultrafine bainitic structure in AISI 431 stainless steel was the goal of this study. For this purpose, the AISI 431 specimens were austenitized at 1100 °C for 60 min followed by low-temperature austempering treatment at different temperatures and times. Austempered samples were characterized using field emission scanning electron microscopy (FESEM), X-ray diffraction (X...

متن کامل

Influence of Co and Al on pearlitic transformation in superbainitic steels

Copyright and Moral Rights for the articles on this site are retained by the individual authors and/or other copyright owners. For more information on Open Research Online's data policy on reuse of materials please consult the policies page. Abstract The effect of cobalt and aluminium on the austenite-to-pearlite transformation in a super-bainitic steel was investigated. The experimental work s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials Research

سال: 2019

ISSN: 1980-5373,1516-1439

DOI: 10.1590/1980-5373-mr-2019-0324