Development of Ni-W alloy plating as a substitution of hard chromium plating
نویسندگان
چکیده
منابع مشابه
Alternatives to hard chromium plating on piston rods
As a main part of hydraulic cylinder, the piston rod is used in tough surrounding and corrosive condition; consequently a high quality protecting layer is essential. Currently EHC, electroplating hard chromium (hard chrome) is a widespread method for piston rod due to powerful performance and low cost. Unfortunately the plating process contains hexavalent chromium (Cr) which is toxic and carcin...
متن کاملDEVELOPMENT OF A TUNGSTEN HEAVY ALLOY, W-Ni-Mn, USED AS KINETIC ENERGY PENETRATOR
Abstract: The objective of this research was to develop a tungsten heavy alloy (WHA) having a microstructure and properties good enough to penetrate hard rolled steels as deep as possible. In addition this alloy should not have environmental problems as depleted uranium (DU) materials. For this purpose a wide spread literature survey was performed and on the base of information obtained in ...
متن کاملWaste Minimization in Chromium Plating Industry Waste Minimization in Chromium Plating Industry
Membrane electrolysis (ME) is the only commercial technology using ion-exchange membranes for chromic acid recycling and recovery. On one hand, the technology has a number of promising advantages, but on the other hand, it has not yet gained common acceptance probably due to a lack of operation stability and efficiency. Published results of the research can be divided into three categories: lab...
متن کاملElectroless Nickel Plating on Magnesium Alloy
he inherent lightness and good strength-to-weight ratio of T magnesium has focused attention on increasing applications in aerospace and allied fields. Its density is two thirds that of aluminum-a conventional structure material for aerospace. Magnesium has one drawback: It is prone to atmospheric corrosion. Further, because of its high chemical affinity for aqueous solutions, it is categorized...
متن کاملZinc-Alloy-Plating for Corrosion Protection
Zinc represents the most effective and economic corrosion protection especially for steel base materials. Improved corrosion resistance can be achieved by alloying zinc with small amounts (around 1 Yo) of transition metal elements like Co, Ni and Fe. Zn-Fe and Zn-Co alloys containing up to 1.5 Yo of the transition metal were plated using an alkaline and acidic electrolyte respectively. Zn-Ni al...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Materials Research Society of Japan
سال: 2016
ISSN: 1382-3469,2188-1650
DOI: 10.14723/tmrsj.41.35