Development of New Die-castable Mg-Zn-Al-Ca-RE Alloys for High Temperature Applications
نویسندگان
چکیده
منابع مشابه
Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
Biodegradable metals have attracted considerable attentions in recent years. Besides the early launched biodegradable Mg and Fe metals, Zn, an essential element with osteogenic potential of human body, is regarded and studied as a new kind of potential biodegradable metal quite recently. Unfortunately, pure Zn is soft, brittle and has low mechanical strength in the practice, which needs further...
متن کاملDie attach properties of Zn–Al–Mg–Ga based high-temperature lead-free solder on Cu lead-frame
Several candidate alloys have been suggested as high-temperature lead-free solder for Si die attachment by different researchers. Among them, Zn–Al based alloys have proper melting range and excellent thermal/electrical properties. In this study, Zn–Al–Mg–Ga solder wire was used to attach Ti/Ni/Ag metallized Si die on Cu lead-frame in an automatic die attach machine. Die attachment was performe...
متن کاملCorrigendum: Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
This Article contains an error in Fig. 2f; the compression curves were incorrectly plotted and labelled. The correct Fig. 2f appears below as Fig. 1. Figure 1.
متن کاملCREEP AGE FORMING OF Al-Zn-Mg ALLOYS WITH OPTIMIZATION OF MECHANICALl PROPERTIES
Creep age forming (CAF) is one of the novel methods in aerospace industry that has been used to manufacture components of panels with improved mechanical properties and reduced fabrication cost. CAF is a combined age-hardening and stress-relaxation that are responsible for strengthening and forming, respectively. This paper deals with the experimental investigations of mechanical and springback...
متن کاملMicrostructure of Al-Zn and Zn-Al Alloys*
The change of microstructure of the title alloys with concentration, temperature and applied thermal treatment was studied in situ by XRD. The alloys, having the Zn atomic fraction, x(Zn), from 0.03 to 0.62, were subjected to: (i) rapid quenching from a temperature, Tt, higher than the solid-solution temperature, Tss, in water at RT (samples WQ); (ii) slow cooling from Tt to RT (samples SC). Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2003
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.44.562