Development of multilayer coating system based on electrophoretic deposition process
نویسندگان
چکیده
منابع مشابه
Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate
Aluminum coating was prepared on AZ91D magnesium alloy substrate using the electrophoretic deposition (EPD) method in absolute ethanol solvent. In order to determine the optimal concentration of AlCl3.6H2O additive, the zeta potential and size of particles in the suspension were measured in the presence of different concentrations of AlCl3.6H2O. The results showed that an appropriate coating is...
متن کاملElectrophoretic Deposition of Hydroxyapatite
The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...
متن کاملElectrophoretic silica-coating process on a nano-structured copper electrode.
A method for silica-coating at the nanoscale by electrophoretic deposition is presented here, using raw or grafted silica dispersions.
متن کاملHydroxyapatite coating by electrophoretic deposition at dynamic voltage.
The aim of this study was to evaluate hydroxyapatite (HA) coatings produced by dynamic voltage during electrophoretic deposition (EPD). Dynamic voltages from 0 to 200 V were incrementally applied in three interims. The as-deposited coating was sintered at 800 degrees C and its properties evaluated. Structure and phase analyses of both as-deposited and sintered coatings were evaluated by scannin...
متن کاملSoap-film coating: High-speed deposition of multilayer nanofilms
The coating of thin films is applied in numerous fields and many methods are employed for the deposition of these films. Some coating techniques may deposit films at high speed; for example, ordinary printing paper is coated with micrometre-thick layers of clay at a speed of tens of meters per second. However, to coat nanometre thin films at high speed, vacuum techniques are typically required,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2017
ISSN: 1348-6535,1882-0743
DOI: 10.2109/jcersj2.16278