Development of multi-channel high power rectangular RF window for LHCD system employing high temperature vacuum brazing technique
نویسندگان
چکیده
منابع مشابه
A High-power L-band Rf Window*
This paper discusses the design, fabrication and testing of a high power alumina disk window in WR1500 waveguide at L Band, suitable for use in the NLC damping ring RF cavities at 714 MHz and the LEDA Accelerator at 700 MHz. The design is based on the fabrication methods used for the successful PEP-II cavity windows. Four prototype windows at 700 MHz have been produced by LBNL for testing at LA...
متن کاملHigh Temperature, High Power RF Life Testing of GaN on SiC RF Power Transistors
As GaN power device technology matures and gains acceptance in the market place, suppliers who provide products using this promising technology must prove its reliability. This paper will provide an overview of the testing approaches used to establish failure rates and will provide a comparison of DC and RF based HTOL methods. The primary focus of this paper will be the high power RF HTOL test ...
متن کاملDevelopment of High Power Cw Rf Windows
Over the past year Advanced Energy Systems Inc has undertaken a program to develop CW High Power RF windows utilising a unique fabrication approach. Our fabrication approach should result in a window that inherently places low stress on the ceramic. The design will provide for excellent cooling of the ceramic, which when combined with the use of a ceramic with a very high thermal conductivity, ...
متن کاملDevelopment of RF MEMS Switches for High Power Applications
This paper introduces a new concept in RF MEMS switches intended for high RF signal power applications at millimetre-wave operation. The novel SPST switch architecture employs electrothermal hydraulic microactuators. Out-of-plane silicon levers, having spring action and latching mechanisms, have been designed to create an OFF-state gap separation distance of 250 μm between ohmic contact electro...
متن کاملemittance control in high power linacs
چکیده این پایان نامه به بررسی اثر سیم پیچ مغناطیسی و کاوه یِ خوشه گر با بسامد رادیویی بر هاله و بیرونگراییِ باریکه هایِ پیوسته و خوشه ایِ ذرات باردار در شتابدهنده های خطیِ یونی، پروتونی با جریان بالا می پردازد و راه حل هایی برای بهینه نگهداشتن این کمیتها ارایه می دهد. بیرونگرایی یکی از کمیتهای اساسی باریکه هایِ ذرات باردار در شتابدهنده ها است که تاثیر قابل توجهی بر قیمت، هزینه و کاراییِ هر شتابدهند...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2010
ISSN: 1742-6596
DOI: 10.1088/1742-6596/208/1/012024