Development of low-temperature thermal decomposition recycling technology from photovoltaic modules to flat glass applications
نویسندگان
چکیده
Abstract The recycling method for thermal decomposition of photovoltaic modules is a that can completely remove EVA, which sealing material, and neatly separate the cells glass. However, most back sheets are made PET, if they simply thermally decomposed, large amount complex bonded carbides (“soot”) generated. We succeeded in suppressing generation soot by heating resin components such as PET melting dropping them into ceramic filter supported catalyst, promoting oxidation reaction, separating glass cleanly. It was confirmed decomposed PV be recycled flat float manufacturing company.
منابع مشابه
RECYCLING OF CdTe PHOTOVOLTAIC MODULES: RECOVERY OF CADMIUM AND TELLURIUM
Research on recycling of CdTe PV modules and manufacturing waste aims in optimizing the separations and recovery of glass, cadmium and tellurium while minimizing life-cycle emissions and energy use, under the constraint of low cost (e.g. a few cents per watt). The major tasks of our research are: a) Cleaning of glass from the metals and recycling of glass; b) separation of Te from Cd and other ...
متن کاملThe Nature of Glass Dynamics: Thermal Reversibility of Spectral Diffusion in a Low Temperature Glass
Temperature cycling optical hole-burning experiments on cresyl violet in ethanol glass are reported. At 1.3 K a hole is burned and measured. The temperature if then raised to 2.1 IQ the hole is measured. The temperature is returned to I, 3 K, and the hole is again measured. The hole is observed to be narrow at 1.3 K, broader at 2.1 K, and then narrow again when the temperature is returned to 1....
متن کاملRecycling COR-TEN® Sea Containers into Service Modules for Military Applications: Thermal Analysis
It is thought that there are 14 million standardised sea containers out of order, equal to 23.3 million twenty-foot equivalent unit (TEU), which could be devoted for other purposes. The COR-TEN®steel containers are the best, due to the features of the materials, to be used in applications intended for the accommodation of people. One of the uses is framed in the area of humanitarian help, as se...
متن کاملEffects on Amorphous Silicon Photovoltaic Performance from High-Temperature Annealing Pulses in Photovoltaic Thermal Hybrid Devices
There is a renewed interest in photovoltaic solar thermal (PVT) hybrid systems, which harvest solar energy for heat and electricity. Typically, a main focus of a PVT system is to cool the photovoltaic (PV) cells to improve the electrical performance, however, this causes the thermal component to under-perform compared to a solar thermal collector. The low temperature coefficients of amorphous s...
متن کاملAn Investigation of Temperature Effects on Solar Photovoltaic Cells and Modules
The solar photovoltaic (PV) systems are facing serious problems due to unavoidable losses in their system, leads to more devation of output power from the input power level. This effect is known as a mismatch effect and is available in PV systems. Many losses are encountered in PV system and it is difficult to minimize such losses. In this paper, the influence of thermal effect on the solar PV ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Japanese Journal of Applied Physics
سال: 2023
ISSN: ['0021-4922', '1347-4065']
DOI: https://doi.org/10.35848/1347-4065/accd7a