Development of Low-cost Water-proof Biodegradable Material from Food-by-products Using Injection Molding System
نویسندگان
چکیده
منابع مشابه
Decolorization of Dyeing Effl uent by Novel Ultrafi ltration Ceramic Membrane from Low Cost Natural Material
This paper is devoted to the application of new low cost ceramic ultrafi ltration membranes material coming from the Tunisian ores (mud) which is usually considered as disastrous for the environment. A ceramic tubular support previously elaborated from mud was coated in the lumen side by slip casting method. After sintering at 650°C, the coated membrane shows homogeneou...
متن کاملInvestigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
متن کاملRapid and low-cost prototyping of medical devices using 3D printed molds for liquid injection molding.
Biologically inert elastomers such as silicone are favorable materials for medical device fabrication, but forming and curing these elastomers using traditional liquid injection molding processes can be an expensive process due to tooling and equipment costs. As a result, it has traditionally been impractical to use liquid injection molding for low-cost, rapid prototyping applications. We have ...
متن کاملDevelopment of an Intelligent Cavity Layout Design System for Injection Molding Dies (RESEARCH NOTE)
This paper presents the development of an Intelligent Cavity Layout Design System (ICLDS) for multiple cavity injection moulds. The system is intended to assist mould designers in cavity layout design at concept design stage. The complexities and principles of cavity layout design as well as various dependencies in injection mould design are introduced. The knowledge in cavity layout design is ...
متن کاملInformation System for Injection Molding Tools
Tools for injection molding are very expensive parts of this kind of production and they must be handled very carefully. An important part of their handling is the management of data related to the tools. The important data for injection molding tools is possible divide to different areas economical, technological, production etc. With an increasing impact of information technologies on manufac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Japan Journal of Food Engineering
سال: 2005
ISSN: 1345-7942,1884-5924
DOI: 10.11301/jsfe2000.6.181