Development of low-cost inorganic salt hydrate as a thermochemical energy storage material
نویسندگان
چکیده
منابع مشابه
Isothermal Redox Kinetics of Co3O4-Fe2O3 Nano-Composite as a Thermochemical Heat Storage Material
Isothermal redox kinetics of as-received Co3O4 (AC), 1 h ball milled Co3O4 (BC), and 1 h ball milled Co3O4-15wt.% Fe2O3 (BCF) was investigated at various temperatures (1130, 1100, 1070, and 1040 °C for reduction and 830, 860, and 890°C for re-oxidation) by thermogravimetric method. It was found that mechanic...
متن کاملExperimental investigation of an innovative thermochemical process operating with a hydrate salt and moist air for thermal storage of solar energy: global performance
This paper investigates an innovative open thermochemical system dedicated to high density and long term (seasonal) storage purposes. It involves a hydrate/water reactive pair and operates with moist air. This work focuses on the design of and experimentation with a large scale prototype using SrBr2/H2O as a reactive pair (400 kg of hydrated salt, 105 kWh of storage capacity and a reactor energ...
متن کاملMicroencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage
Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...
متن کاملClathrate hydrogen hydrate--a promising material for hydrogen storage.
Hydrogen is viewed as a promising clean fuel of the future. A low-cost hydrogen storage technology that provides a high storage capacity and fast kinetics is a critical factor in the development of a hydrogen economy for transportation. The technologies to store hydrogen can be classified into three types: compression, liquefaction, and storage in a solid material. 2] Compressing hydrogen requi...
متن کاملTesting of High Thermal Cycling Stability of Low Strength Concrete as a Thermal Energy Storage Material
Concrete has the potential to become a solution for thermal energy storage (TES) integrated in concentrating solar power (CSP) systems due to its good thermal and mechanical properties and low cost of material. In this study, a low strength concrete (C20) is tested at high temperatures up to 600 ◦C. Specimens are thermally cycled at temperatures in the range of 400–300 ◦C, 500–300 ◦C, and 600–3...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Solar Energy Materials and Solar Cells
سال: 2018
ISSN: 0927-0248
DOI: 10.1016/j.solmat.2017.10.021