Development of hybrid electrodeposition/slurry diffusion aluminide coatings on Ni-based superalloy with enhanced hot corrosion resistance

نویسندگان

چکیده

Ni/Co-modified aluminide coatings were prepared on Hastelloy-X superalloy by a combined process of electrodeposition and slurry aluminizing. In this regard, pure layers Ni Ni-50wt.%Co initially applied via successive aluminization was carried out technique. The microstructural chemical composition characterization the specimens revealed that compact dense coating formed with two-layered structure containing outer Al-rich b phase inner interdiffusion zone. Moreover, presence pre-electrodeposited inhibited outward diffusion flux elements from substrate effectively suppressed formation Kirkendall pores. hot corrosion studies obtained indicated addition layer could enhance high-temperature performance when exposed to sulfate salt.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Development of Corrosion Resistant Zn-Ni-TiO2 Composite Coatings

The Zn-Ni-TiO2 composite coatings were developed on mild steel by electrodeposition method. The bath constituents (ZnSO4.6H2O, NiSO4.6H2O, TiO2, thiamine hydrochloride) and operating conditions (temperature and pH) were optimized by Hull cell method, for peak performance of the coating against corrosion. The coatings were prepare...

متن کامل

Microstructure and corrosion resistance of Ni-based alloy laser coatings with nanosize CeO2 addition.

Micron-size Ni-base alloy (NBA) powders were mixed with both 1.5 wt.% (hereinafter %) micron-size CeO2 (m-CeO2) and also 1.5% and 3.0% nano-size CeO2 (n- CeO2) powders. These mixtures were coated on low-carbon steel (Q235) by 2.0 kW CO2 laser cladding. The effects on the microstructures, phases and electrochemical corrosion of the coatings upon the addition of m- and n- CeO2 powders to NBA (m- ...

متن کامل

Hot Ductility Loss in a Fe-Ni-Based Superalloy

High temperature tensile tests have been conducted on samples of a Fe-Ni based superalloy, Incoloy A-286, and significant ductility loss has been observed at 1220 °C. Titanium-rich, thin-film-like phase has been found on the inter-granular facets of fracture surfaces. It appears that sulfur content of Ti-rich phase was higher than that of the matrix. At 1220 °C, liquation of Ti-rich phases has ...

متن کامل

High-temperature Corrosion Behavior of Iron Aluminide Alloys and Coatings

A multi-year effort has been focused on optimizing the long-term oxidation performance of ingot-processed (IP) and oxide-dispersion strengthened (ODS) Fe3Al and iron aluminidebased coatings. Based on results from several composition iterations, a Hf-doped alloy (Fe28Al-2Cr-0.05at.%Hf) has been developed with significantly better high temperature oxidation resistance than other iron aluminides. ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of composites and compounds

سال: 2021

ISSN: ['2676-5837', '2716-9650']

DOI: https://doi.org/10.52547/jcc.3.1.1