Development of High-Strain-Rate Superplastic Oxide Ceramics
نویسندگان
چکیده
منابع مشابه
Development of Superplastic Structural Ceramics
Superplastic structural ceramics (Y-TZP, A1203, Si3N4, and their composites) that can withstand biaxial stretching to large strains have been developed recently. Microstructural design of these ceramics first requires an ultrafine grain size that is stable against coarsening during sintering and deformation. A low sintering temperature is a necessary, but not a sufficient, condition for achievi...
متن کاملHIGH TEMPERATURE ELASTIC STRAIN EVOLUTION IN Si3N4-BASED CERAMICS
Tension experiments in vacuum were performed on a monolithic Si3N4 sample at 1375°C and a 20Vol% SiCp-Si3N4 composite sample at 1400°C using the new SMARTS diffractometer at the Los Alamos Neutron Science Center. The deep penetration of neutrons facilitated these in-situ studies. In particular, the hkl-dependent strains were measured and the results interpreted by Eshelby-based modeling for the...
متن کاملRe-examination of “missing strain” during superplastic deformation of AA7475
Missing strain,” a discrepancy between the total macroscopic strain and the strain contributed by grain boundary sliding (GBS) during superplastic deformation, appears to exist in previous investigations. In this work, the contribution of GBS (ξGBS) and intragranular strain (ξIG) were simultaneously measured using scratch test conducted on AA7475 samples after deformation at 500 °C at initial s...
متن کاملHigh Strain Ra 33 . High Strain Rate and Impact Experiments
Experimental techniques for high-strain-rate measurements and for the study of impactrelated problems are described. An approach to classifying these experimental techniques is presented, and the state-of-the-art is briefly described. An in-depth description of the basis for high-strain-rate experiments is presented, with an emphasis on the development of a range of strain rates and a range of ...
متن کاملMechanical Behavior of TWIP Steel in High Strain Rate Torsional Test
Advanced high strength steels (AHSS) have recently attracted great attention because of their superior mechanical properties. A modern group of these steels, known as twinning induced plasticity (TWIP) steels, shows a unique combination of strength and ductility even at high rates of strain. In order to examine the functionality of such steels in dynamic loading conditions, their mechanical beh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2007
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.115.395