Development of high density hydrocarbon fuel.
نویسندگان
چکیده
منابع مشابه
Detonations in Hydrocarbon Fuel Blends
A study of detonations in high-molecular weight hydrocarbon fuels of interest to pulse detonation engine applications was performed in a 280 mm diameter, 7.3 m long facility. Detonation pressure, wave speed, and cell width measurements were made in JP-10 mixtures and in mixtures representative of the decomposition products of JP-10. Experiments were performed in vapor-phase JP-10 mixtures at 35...
متن کاملDetonations in Hydrocarbon Fuel Blends
A study of detonations in high molecular weight hydrocarbon fuels was performed in two GALCIT facilities: the 280 mm gaseous detonation tube (GDT) and a 1180 liter vessel (HYJET) with jet initiation capability. In the GDT, detonation pressure, wave speed and cell width measurements were made in hexane-oxygen-nitrogen mixtures with and without the addition of lower molecular weight fuels. Stoich...
متن کاملDynamic investigation of hydrocarbon proton exchange membrane Fuel Cell
Sulfonated polyether ether ketone (SPEEK) is categorized in a nonfluorinated aromatic hydrocarbon proton exchange membrane (PEM) group and considered as a suitable substitute for common per-fluorinated membranes, such as Nafion, due to wider operating temperature, less feed gas crossover, and lower cost. Since modeling results in a better understanding of a phenomenon, in this study a dynamic o...
متن کاملبوزدایی از fuel oil deodorization of fuel oil
مطالعات و بررسی های انجام گرفته نشان می دهد ترکیبات بودار موجود در fuel oil عمدتا ترکیبات سولفوردار سخت مثل تیوفن، دی متیل بنزوتیوفن و ... بوده و روشهای بوزدایی همچون استخراج با حلالهای اسیدی و بازی ، رقیق کاری با گازولین ، ماسکینگ با بوتیل استات نتایج چندان مطلوبی در بوزدایی از آن نشان نمی دهند.همچنین روش جذب سطحی برای بوزدایی fuel oil تنها با استفاده از جاذب هایی همچون بنتونیت و توفیت...
15 صفحه اولThe Design of High Power Density Annular Fuel for LWRs
Fuel performance models have been developed to assess the performance of internally and externally cooled LWR annular fuel. Such fuel may be operated at 30-50% higher core power density than the current operating LWRs, and to a burnup of 80-100MWd/kgU. The models are used to optimize the fuel design so that it is able to achieve high power density and high burnup, and to identify the features o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Aeronautical and Space Sciences
سال: 1989
ISSN: 0021-4663
DOI: 10.2322/jjsass1969.37.368