Development of fuel Processor for PE Fuel Cell System
نویسندگان
چکیده
منابع مشابه
بوزدایی از fuel oil deodorization of fuel oil
مطالعات و بررسی های انجام گرفته نشان می دهد ترکیبات بودار موجود در fuel oil عمدتا ترکیبات سولفوردار سخت مثل تیوفن، دی متیل بنزوتیوفن و ... بوده و روشهای بوزدایی همچون استخراج با حلالهای اسیدی و بازی ، رقیق کاری با گازولین ، ماسکینگ با بوتیل استات نتایج چندان مطلوبی در بوزدایی از آن نشان نمی دهند.همچنین روش جذب سطحی برای بوزدایی fuel oil تنها با استفاده از جاذب هایی همچون بنتونیت و توفیت...
15 صفحه اولEvaluation of an Alkaline Fuel Cell for Multi- Fuel System
The performance of an alkaline fuel cell is investigated using three different fuels, e g., methanol, ethanol and sodium borohydride. Pt/C/Ni was used as anode whereas Mn/C/Ni was used as standard (Electro-Chem-Technic, UK) cathode for all the fuels. Thus, the alkaline fuel cell is used for multi-fuel system. Fresh mixture of electrolyte, potassium hydroxide (5M), and fuel (2M) was fed to and w...
متن کاملControl-oriented model of fuel processor for hydrogen generation in fuel cell applications
A control-oriented dynamic model of a catalytic partial oxidation-based fuel processor is developed using physics-based principles. The fuel processor system (FPS) converts a hydrocarbon fuel to a hydrogen (H2)-rich mixture that is directly feed to the proton exchange membrane fuel cell stack (PEM-FCS). Cost and performance requirements of the total powerplant typically lead to highly integrate...
متن کاملModelling and Control of an Onboard Fuel Processor for Indirect Methanol Fuel Cell Vehicles
In this paper, the dynamic model of a fuel processor for hydrogen production from steam reformation is first introduced. The fuel processor is built according to an integrated burner and reformer bi-catalyst plate configuration. The model is then coupled with the one of a PEM fuel cell, and the overall simulator is used to analyze different control configurations. It is shown that the limited d...
متن کاملStatic Control in PE Fuel Gas Pipe
Why address this issue? As of 2002, 525,959 miles (or about 46%) of gas distribution mains in the US were plastic and PE is the material of choice for distributors. It doesn’t corrode, doesn’t need cathodic protection and has a life of at least 100 years. It is a remarkable fuel gas distribution material. During a Plastic Pipe Fuel Gas Symposium I attended, a southern California gas distributor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Zairyo-to-Kankyo
سال: 2002
ISSN: 0917-0480,1881-9664
DOI: 10.3323/jcorr1991.51.538