Development of elevated temperature P/M aluminum alloy by rapid solidification processing.
نویسندگان
چکیده
منابع مشابه
DSC analysis of Al6061 aluminum alloy powder by rapid solidification Effect of additives
Differential scanning calorimetry (DSC) is a powerful technique that measures the heat evolution from a sample under a controlled condition and studies the phase transformation, precipitation, and dissolution activities. In this work, we investigated the influence of admixed silicon and silicon carbide and the effect of different atmospheres on the heat flow properties and microstructure of ato...
متن کاملINFLUENCE OF THE PRIMARY SOLIDIFICATION ON THE SECONDARY SOLIDIFICATION DURING SEMISOLID METAL (SSM) PROCESSING OF A356.0 ALUMINUM ALLOY BY MECHANICAL STIRRING
Abstract: The aims of this research were to investigate the effects of semisolid metal (SSM) processing parameters (i.e., shear rates –times – temperatures combinations) on the primary solidification products and isothermal holding duration, subsequent to cessation of stirring on the secondary solidification of Al-Si (A356) alloy. The dendrite fragmentation was found to be the governing m...
متن کاملAlloy Development through Rapid Solidification for Soft Magnetic Application
This chapter describes different rapidly solidified processing routes of soft magnetic alloys and their properties and applications in different areas. Section-2 explains the details of process mechanism. The functions of different alloying elements are discussed with the alloy design of soft magnetic alloys in section-3. The structureproperty correlation is described in section-4. Section-5 hi...
متن کاملRheological behavior of a commercial AA5182 aluminum alloy during solidification
During casting of aluminum alloys, the partially solidified material is submitted to thermally induced strains that can lead to severe casting defects, such as hot tearing. In this work, carried out in the frame of the European project VIR[CAST], the rheological behavior of a partially solidified AA5182 aluminum alloy has been investigated in order to provide constitutive equations to predict h...
متن کاملCast Aluminum Alloy for High Temperature Applications
Originally developed by NASA as high performance piston alloys to meet U.S. automotive legislation requiring low exhaust emission, the novel NASA alloys now offer dramatic increase in tensile strength for many other applications at elevated temperatures from 450°F (232°C) to about 750°F (400°C). It is an ideal low cost material for cast automotive components such as pistons, cylinder heads, cyl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1987
ISSN: 0451-5994
DOI: 10.2464/jilm.37.704