Development of Electroplated Diamond Saw Wire by Novel Electroplating Technique
نویسندگان
چکیده
منابع مشابه
Application of harmony search algorithm to evaluate performance of diamond wire saw
Evaluation and prediction of performance of diamond wire saw is one of the most important factors involved in planning the dimension stone quarries. The wear rate of diamond wire saw can be investigated as a major criterion to evaluate its performance. The wear rate of diamond wire saw depends upon non-controlled parameters related to rock characteristics and controlled parameters related to ch...
متن کاملExperimental Study on Slicing of Sapphire with Fixed Abrasive Diamond Wire Saw
Experimental study on slicing of sapphire with fixed abrasive diamond wire saw was conducted in this paper. The process parameters were optimized through orthogonal experiment of three factors and four levels. The effects of wire speed, feed speed and tension pressure on the surface roughness were analyzed. Surface roughness in cutting direction and feed direction were both detected. The result...
متن کاملDiamond Coated LW - SAW Sensors - Study of Diamond Thickness Effect †
This study focuses on the fabrication and characterization of Love wave surface acoustic wave (LW-SAW) sensors with a thin nano-crystalline diamond (NCD) coating with an integrated microfluidics system. The effect of diamond layer thickness on the acoustic wave phase velocity and the sensor’s sensitivity have been investigated experimentally and compared with theoretical simulations. The fabric...
متن کاملTheoretical Development of the Estimate of Diamond Wire Saving Plant
The article deals with possible estimates which would make the choice of the diamond wire sawing plant easier. Based on the principle law of friction of thin elastic bodies, the estimate procedure intended for the choice of a knew plant, and the estimate procedure for verification of the known plant were established. Orientation and detailed way of estimating the pulling force of the diamond wi...
متن کاملCharacterization of black chrome films prepared by electroplating technique
The surface and optical properties of black chrome films prepared by two different electrochemical baths were characterized. The black chrome films have been deposited on bright nickel substrates by electroplating technique. The surface morphology and phase structure of the films were investigated by using scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. The chemica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 2017
ISSN: 0912-0289,1882-675X
DOI: 10.2493/jjspe.83.820