Development of Diamond Tools for Superprecision Machining with Compositionally Graded Layers from Silicon Carbide Shank to Diamond Chip.
نویسندگان
چکیده
منابع مشابه
Titanium Impurities in Silicon, Diamond, and Silicon Carbide
Since transition metal impurities affect the electronic and optical properties of semiconductors [1], it is important to understand the role of such unavoidable impurities on those properties. At the same time, transition metals in semiconductors can be used in other unusual situations. The energy levels related to transition metal impurities are aligned with respect to each other for the same ...
متن کاملSingle Point Diamond Turning of CVD coated Silicon Carbide
Scratching experiments, using diamond styli and single point diamond tools, were performed to simulate Single Point Diamond Turning (SPDT). The results of these experiments were used to determine if a ductile response is possible, and then to determine the critical depth of cut or penetration depth for the ductile to brittle transition (DBT). The depths of the scratches produced at different lo...
متن کاملHigh Performance Power Diodes on Silicon Carbide and Diamond
Silicon Carbide and diamond Schottky barrier diodes (SBD) with an original and high efficiency termination are presented. The influences of termination parameters on the diodes electrical performance are investigated for both punch-through (PT) and non punch-through (nPT) structures by simulations. Design guidelines, based on simple analytical expressions, for ideal SBDs are included. Electrica...
متن کاملAn Investigation on Two Types of Crystalline Micro-diamond Film Coated Tools Lapping with Sapphire Wafer
Two types of micron-diamond films were prepared on YG6 substrate by hot filament chemical vapor deposition(HFCVD) method. Morphology and orientation of crystalline growth were evaluated by SEM and XRD. Diamond film coated tools and sapphire wafer’ surface before and after lapping experiment were contrasted. The results indicated that a significant change in Raman spectrum of two types of micro...
متن کاملComparison between Numerical Simulations and Experiments for Single Point Diamond Turning of Silicon Carbide
Single Point Diamond Turning (SPDT) experiments conducted on single crystal 6-H Silicon Carbide (SiC) has shown chip formation similar to that seen in the machining of metals. The ductile nature of SiC is believed to be the result of a high pressure phase transformation (HPPT), which generates a plastic zone of material that behaves in a metallic manner. This metallic behavior is the basis for ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1994
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.41.653