Development of Controlling Technology for Shrinkage Cracking in Reinforced Concrete Building Structures
نویسندگان
چکیده
منابع مشابه
Application Procedure for Optimized Placement of Buckling Restrained Braces in Reinforced Concrete Building Structures
Abstract—The optimal design procedure of buckling restrained braces (BRBs) in reinforced concrete (RC) building structures can provide the distribution of horizontal stiffness of BRBs at each story, which minimizes story drift response of the structure under the constraint of specified total stiffness of BRBs. In this paper, a simple rule is proposed to convert continuous horizontal stiffness o...
متن کاملprediction method of drying shrinkage crack in reinforced concrete walls
because thin plate reinforced concrete members such as walls and slabs are greatly influenced by the drying shrinkage, cracks can occur in these members due to the restraint of the volume change caused by drying shrinkage. therefore, the control of cracking due to drying shrinkage is very important in building construction that the thin plate members are frequently used. however, few researches...
متن کاملCracking of Concrete Cover in Frp Reinforced Concrete Elements under Thermal Loads
Synopsis: The effects of thermal loads on the structural performance of FRP reinforced concrete elements are analyzed in this paper. The difference in transverse coefficient of thermal expansion (CTE) between FRP and concrete causes the presence of tensile stresses within the concrete and, eventually, the formation of cracks when the temperature increases. As part of an inter-university experim...
متن کاملExperimental Investigation of Corrosion Cracking in Reinforced Concrete Beams Containing Nano Wollastonite
Cracking of the concrete cover due to corrosion is defined as the serviceability limit state of reinforced concrete structures. This study evaluated the influence of a mineral admixture i.e. nano wollastonite on corrosion performance and serviceability of reinforced concrete structures by performing an accelerated corrosion test on ten reinforced concrete beams under a sustained load. To do so,...
متن کاملUtilising confinement reinforcement for shear resistance in reinforced concrete structures
Common transverse reinforcement of reinforced concrete members with circular cross-section consists of round ties or spirals. Its purpose in members that are not subjected to significant shear loading is to provide proper confinement for concrete, and eliminate buckling of the longitudinal reinforcement bars. If spirals are to be used as both shear enabler and confiner for reinforced concrete b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Concrete Journal
سال: 2008
ISSN: 0387-1061
DOI: 10.3151/coj1975.46.10_10