Development of Controlled Low-Strength Materials using Class –F Flyash and Common Effluent Treatment Plant (CETP) Sludge
نویسندگان
چکیده
منابع مشابه
Reuse of textile effluent treatment plant sludge in building materials.
This study examines the potential reuse of textile effluent treatment plant (ETP) sludge in building materials. The physico-chemical and engineering properties of a composite textile sludge sample from the southern part of India have been studied. The tests were conducted as per Bureau of Indian Standards (BIS) specification codes to evaluate the suitability of the sludge for structural and non...
متن کاملPerformance Evaluation of a Common Effluent Treatment Plant (cetp) Treating Textile Wastewaters in India
Several small scale industries have formed cooperatives and established Common Effluent Treatment Plants (CETP) to treat wastewater in India. The wastewaters are subjected to primary treatment in the industry and thereafter discharged to be further treated at the CETPs. The management and treatment costs are shared by the member industries. The CETP under study is situated in North Western part...
متن کاملEngineering Controlled Low Strength Materials Using
An investigation was conducted to determine the influence of recycled scrap tire rubber on the engineering properties of controlled low strength material (CLSM). With control over the ultimate compressive strength of CLSMs being key for applications such as backfilling utility trenches where re-excavation is often necessary, incorporation of scrap tire rubber into the CLSM mixture is a viable w...
متن کاملEffect of Metal Salt Coagulants on Treatment of Activated Sludge Effluent in Sulfite Mill Pulp and Paper Plant
Pulp and paper effluents are considered as serious environmental hazards and their treatment, because of multiplicity of impurities and complexity of their chemical structures, is one of the most difficult and inconvenient industrial processes. As the most pulp and paper mill work on kraft process, there are few studies in literature on the treatment of neural sulfite semi chemical (NSSC) p...
متن کاملEngineering Controlled Low Strength Materials Using Scrap Tire Rubber
An investigation was conducted to determine the influence of recycled scrap tire rubber on the engineering properties of controlled low strength material (CLSM). With control over the ultimate compressive strength of CLSMs being key for applications such as backfilling utility trenches where re-excavation is often necessary, incorporation of scrap tire rubber into the CLSM mixture is a viable w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2017
ISSN: 2321-9653
DOI: 10.22214/ijraset.2017.11036