Development of compact portable ultrasound robot for home healthcare
نویسندگان
چکیده
منابع مشابه
Mechanical design and evaluation of a compact portable knee–ankle–foot robot for gait rehabilitation
Article history: Received 9 December 2015 Received in revised form 22 April 2016 Accepted 23 April 2016 Available online 29 April 2016 This paper presents the mechanical design and evaluation of a knee–ankle–foot robot, which is compact, modular and portable for stroke patients to carry out overground gait training at outpatient and home settings. A novel compact series elastic actuator (SEA) i...
متن کاملModulator for Portable Ultrasound Scanners
In this paper the system level design of a continuous-time ∆Σ modulator for portable ultrasound scanners is presented. The overall required signal-to-noise ratio (SNR) is derived to be 42 dB and the sampling frequency used is 320 MHz for an oversampling ratio of 16. In order to match these requirements, a fourth order, 1-bit modulator with optimal zero placing is used. An analysis shows that th...
متن کاملElectro-Mechanical Safety Testing of Portable ECG Devices for Home Healthcare Usage
OBJECTIVES This paper suggests the experimental guidelines to evaluate the electro-mechanical safety of belt type equipment. The electro-mechanical safety was determined by using the International Electrotechnical Commission guidelines, which are widely used as important factors for assessing the electro-mechanical safety of belt type equipment. However, the local guidelines on wearable healthc...
متن کاملDevelopment of a Portable Welding Robot with EtherCAT Interface
This paper presents a portable robot that is to use for welding process in shipbuilding yard. It has six degree of freedom and 3kg payload capability. Its weight is 21.5kg so that human workers can carry it to the work place. Its body mainly made of magnesium alloy and aluminum alloy for few parts that require high strength. Since the distance between robot and controller should be 50m at most,...
متن کاملA Compact Reformer for Portable Fuel Cells
A compact reformer to generate hydrogen for portable fuel cell applications is presented. This reformer is a conventional type single-path tubular reactor packed with granular catalyst particles in which steam reforming and catalytic partial oxidation reactions take place in series using a mixture of methanol and water as a feed. The novel feature of this reformer is in the interlacing of the f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Engineering
سال: 2019
ISSN: 2051-3305,2051-3305
DOI: 10.1049/joe.2018.9406