Development of Cold Rolled High Strength Steel Sheet with Bake Hardenability and Excellent Deep Drawability
نویسندگان
چکیده
منابع مشابه
The Influence of Surface Roughness of Drawbead on Non-Symmetry Deep Drawing Cold Rolled Steel Sheet
This study was aimed to explain the influence of surface roughness of the drawbead on non-symmetry deep drawing cold rolled steel sheet to improve the drawability of cold rolled steel sheet. The variables used in this study included semi-circle drawbead with 3 levels of surface roughness which are 6.127 μm Ra, 0.963 μm Ra and 0.152 μm Ra and cold rolled steel sheet according to 3 grades of the ...
متن کاملExperimental and Numerical Study of Preform Design in Multi Stage Deep Drawing of High Strength Thin Steel Sheet
In this paper, experimental results of a deep drawing process to produce a cylinder of high strength steel with a spherical head were compared with it’s simulation results and three proposal design types. Meanwhile, the amount of limiting draw ratio in some stages was determined. Accuracy and precision of the results of a finite element software to predicting the multi stage deep drawing proces...
متن کاملDevelopment of Hot-Rolled Sheet Steel with Significant Increase in Tensile Strength Induced by Strain Age Hardening*
A new type of bake-hardenable high strength hotrolled sheet steel was developed, which shows remarkable increase in tensile strength as well as yield strength after strain age hardening without addition of special elements. The new sheet steel possesses excellent crashworthiness and high fatigue strength, and also shows good formability almost equal to that of conventional high strength sheet s...
متن کاملVanadium in Cold-rolled Sheet Steels
In hot rolled products, which are the subject of other presentations here, vanadium has been used for many years in high strength products, often in combination with other microalloying additions such as niobium or titanium. Vanadium can provide important contributions via both precipitation strengthening and ferrite grain refinement (due to austenite conditioning during thermomechanical proces...
متن کاملFatigue strength evaluation of self-piercing riveted cold rolled steel joints under mixed mode loading conditions
Fatigue strength of cross-shaped specimens of SPR joints made of SPCC was evaluated at load angles of 0°, 45°, and 90°. For the static strength at load angles of 0°, 45°, and 90°, the maximum loads were determined to be 4890N, 1969N, and 1611N, respectively. Regarding for the relationship between the load amplitude and the number of cycles (Nf), the results were 014 . 0 3 . 2209 − = f amp N P ,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1982
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.68.9_1362