Development of carbon materials for sulfur cathodes in inorganic-based solid-state lithium sulfur batteries
نویسندگان
چکیده
Inorganic-based solid-state lithium-sulfur batteries (SSLSBs) with high energy density and safety have attracted wide attention as they are one of the most promising storage devices to meet future market requirements. However, development SSLSBs faces various challenges due unreasonable structural design in sulfur cathodes. Carbon is indispensable components The rational carbon materials becomes an important strategy address This review summarizes recent literature about application for cathodes inorganic-based SSLSBs. It starts introduction different from zero-dimensional (0D) three-dimensional (3D) materials. Particularly, this paper highlights cathode fabrication methods, toward improving conductivity cathodes, buffering volume changes reducing interfacial resistance among components, increasing mass loading active Finally, existing solutions discussed proposed.
منابع مشابه
Capacity Fade Analysis of Sulfur Cathodes in Lithium–Sulfur Batteries
Rechargeable lithium-sulfur (Li-S) batteries are receiving ever-increasing attention due to their high theoretical energy density and inexpensive raw sulfur materials. However, their rapid capacity fade has been one of the key barriers for their further improvement. It is well accepted that the major degradation mechanisms of S-cathodes include low electrical conductivity of S and sulfides, pre...
متن کاملCarbon/Sulfur Composite Cathodes for Flexible Lithium/Sulfur Batteries: Status and Prospects
*Correspondence: Zhumabay Bakenov , Institute of Batteries LLC, Kabanbay Batyr Avenue 53, Astana 010000, Kazakhstan e-mail: [email protected] High specific energy and low cost flexible lithium/sulfur batteries have attracted significant attention as a promising power source to enable future flexible and wearable electronic devices. Here, we review recent progress in the development of free-sta...
متن کاملSulfur-impregnated disordered carbon nanotubes cathode for lithium-sulfur batteries.
The commercialization of lithium-sulfur batteries is hindered by low cycle stability and low efficiency, which are induced by sulfur active material loss and polysulfide shuttle reaction through dissolution into electrolyte. In this study, sulfur-impregnated disordered carbon nanotubes are synthesized as cathode material for the lithium-sulfur battery. The obtained sulfur-carbon tube cathodes d...
متن کاملGraphene/Sulfur/Carbon Nanocomposite for High Performance Lithium-Sulfur Batteries
Here, we report a two-step synthesis of graphene/sulfur/carbon ternary composite with a multilayer structure. In this composite, ultrathin S layers are uniformly deposited on graphene nanosheets and covered by a thin layer of amorphous carbon derived from β-cyclodextrin on the surface. Such a unique microstructure, not only improves the electrical conductivity of sulfur, but also effectively in...
متن کاملHigh-Performance All-Solid-State Lithium–Sulfur Batteries Enabled by Amorphous Sulfur-Coated Reduced Graphene Oxide Cathodes
DOI: 10.1002/aenm.201602923 suffer from safety problems arising from lithium anode and fast capacity fading due to the insulating nature of sulfur, the dissolution-induced polysulfide shuttle reaction, and large volume changes.[4–6] To address these issues, carbonaceous material[7,8] and conducting polymers[9] have been used to trap the high-order polysulfides in the cathodes; protective layers...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Canadian Journal of Chemistry
سال: 2023
ISSN: ['0008-4042', '1480-3291']
DOI: https://doi.org/10.1139/cjc-2023-0012